Reference: 4477.62
Reduction ring Ø24mm for DELLORTO PHBG carburettor
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Banner
Ideal for lost or wear especially that it is a very special screw, only to spring idle screw carburetors PHBG and PHBG racing edition. High quality certified, true DELLORTO.
5mm diameter special thread screws
Length of the complete screw: 30mm
Length of single thread: 15mm
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 9482
The replacement cover for your DELLORTO PHBG carburetors except racing black edition.
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 129517
The only wealth screws for your PHBG!