Reference: 09506
Float shaft for DELLORTO PHBG carburettors
Bar, axle, float holding rod for DELLORTO carb.
Banner
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.