Reference: 10 5397B
Cap for MALOSSI transparent PHBG tank with seal
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Banner
Transparent MALOSSI tank for all PHBG & PHBD carburettors, this tank has a drain and main jet change plug, so you can change your jet in a very short time with a simple flat screwdriver. It is delivered with the cap, the cap O-ring but without tank gasket or tank screws.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.