Reference: 121692
Locking nut (against nut) for DELLORTO cable tensioning screw
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Banner
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 1298
The little room in which hangs the starter cable.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.