• Banner

Kit 80cc Ø50mm BARIKIT Racing aluminum minarelli AM6
  • Kit 80cc Ø50mm BARIKIT Racing aluminum minarelli AM6

Kit 80cc Ø50mm aluminum BARIKIT Racing minarelli am6

EQ-987-S

A large diameter 50mm durable aluminum with 5 transfers and exhaust with bar, incoming high compression type of cylinder head. 50cc motorcycle equipped with the engine minarelli am6. Assured performance!

Stage 1 engine preparation
€195.83
Quantity
Shipping in 7 to 12 days depending on arrivals BARIKIT

Description

Attention prohibited on public roads! This cylinder engine displacement exceeding 50cc is only reserved for the competition on the racetrack, run ...!

Here are the top 80cc engine in the Spanish brand BARIKIT for engine MINARELLI AM6! This model has low price offers good power and a very large increase in engine performance. The cylinder is an aluminum model nikasil treated, so it offers very high reliability and durability. The cylinder has a large exhaust with bar and 4 side intake ports + 1 rear. The base preserves original form, you should still align with housings for the better.

vue Kit 80cc Ø50mm BARIKIT Racing aluminium minarelli am6

The diameter is 50mm, so it offers a real displacement 76.57cc along with the original 39mm stroke engine MINARELLI AM6. The piston is a mono-segment favoring high revs high silicon content. The piston has a specific skirt, the segment comes with the kit is fine 1 mm, chrome to allow high speeds and ensure high resistance to friction.

admission Kit 80cc Ø50mm BARIKIT Racing aluminium minarelli am6

The cylinder head is aluminum with plug for antifreeze carburetion, this cylinder head has a high combustion chamber compression hemispherical shape, polished finish. Incoming type of model to align perfectly with the piston and optimize engine power.

sortie échappement Kit 80cc Ø50mm BARIKIT Racing aluminium minarelli am6

Clearly, BARIKIT hits hard with this high engine and puts at disposal its knowledge to performance enthusiasts! And this for a price more than reduced. This cylinder promise you both reliability, power (especially with good diagrams, its 5 transfers its exhaust with bar and its end segment) and many high revs! We will miss only the wedge exhaust (28mm diameter passage to 25mm) is not delivered, however, this is just a detail ... for price and performance developed!

transferts Kit 80cc Ø50mm BARIKIT Racing aluminium minarelli am6

We recommend to accompany this kit with at least: a carburizing Ø21mm (24/25 to make the most well), admission kit with adjustable flexible pipe assembly, exhaust racing, cold candle racing iridium, crankshaft and reinforced bearings , engine oil 100% synthetic racing ....

contains:

Master cylinder Ø50mm aluminum 5 transfers with big exhaust with bar
Aluminum -Culasse incoming high compression hemispherical
-piston Mono-segment Ø50mm
X1 end segment chrome 1mm thick
Axis-piston Ø12mm X 41mm length
Piston Type C -Clips
-pack High engine gasket
-Vissere And connects breech plug antifreeze


montage Kit 80cc Ø50mm BARIKIT Racing aluminium minarelli am6

Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!

This high engine fits the 50cc motorcycles following gearbox fitted the engine MINARELLI AM3, AM4, AM5, AM6 euro 1 am6 euro 2:

-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, attention to motor past DERBI euro 3)
-APRILIA RX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-APRILIA MX engine AM6 (after 2006, attention to motor past DERBI euro 3)

-Beta CRE

RR -Beta
-Beta RR ALU

-Honda HM
-Honda CRE
-Honda BAJA

-HUSQUVARNA WXE
-HUSQUVARNA CH

-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON

-MALAGUTI XTM
-MALAGUTI XSM

-FANTIC CABALLERO

-PEUGEOT XP6
-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6
-PEUGEOT XR7

-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX

-RIEJU RS1
RS2 -RIEJU
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
SMX -RIEJU
-RIEJU MRX
-RIEJU SPIKE

-KEEWAY TX EN

-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER

SM -SHERCO
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO

And many other machines!

Product Details
EQ-987-S
New product

Data sheet

Echappement
Ø 28mm (as original euro 1)
Nombre de transferts d'admission
5 transferts (comme l'origine)
Cylinder head:
Hemispherical with incoming stud
Nombre de segment
Mono-segment (1 segment)
Displacement:
80cc
Cylindrée réelle
76.57cc
Lumière d'échappement
With bar (2 parts)
Diameter (Ø):
50mm
Matière
Aluminium
Course
Origin
Refroidissement
Liquid

Specific References

ean13
8435031114815
You might also like
16 other products in the same category:

Reference: EQ-1033-S

BRK Competition Systems By BARIKIT

Kit 80cc Ø50mm BARIKIT BRK Racing 2 aluminum minarelli am6

The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head incoming combustion chamber! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....

Price €216.66
Shipping in 7 to 12 days depending on BARIKIT factory arrivals
More
Shipping in 7 to 12 days depending on BARIKIT factory arrivals

Reference: EQ-1034-S

BRK Competition Systems By BARIKIT

Kit 80cc Ø50mm BARIKIT BRK Racing 2 aluminum cylinder head minarelli am6

The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head with bi-part stud! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....

Price €241.66
Shipping in 7 to 12 days depending on BARIKIT factory arrivals
More
Shipping in 7 to 12 days depending on BARIKIT factory arrivals

Reference: 133.1008

POLINI

Kit 80cc Ø50mm POLINI Evolution aluminum minarelli am6

One of the rare competitors at the height of the TEAM MHR, this POLINI EVOLUTION offers a lot of torque and power, to accompany a good configuration!

Price €289.99
Please note, requires a delay of more than 20 days!
More
Please note, requires a delay of more than 20 days!