Reference: 25104.00
Cylinder - piston without cylinder head 80cc Ø48mm PARMAKIT aluminum axis 12mm for FANTIC CABALLERO
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Banner
Part which has become very rare, here is a kit for vintage 50 2T motorcycle engines from the Belgian manufacturer FLANDRIA RECORD, APPOLO, BERMUDA, AMICO, MINI FUTURA, SP 847, SP 837, SP 247 ... (check the shape of your cylinder before purchase). This kit is delivered to you complete as in the photo.
This high performance kit from PARMAKIT is very robust, powerful and torquey! It allows in addition to the refurbishment, a nice increase in the power of the machine!
It consists of a nicasil-treated aluminum cylinder with two intake transfer + a blind rear, a single-segment vertex piston! Diagrams, compression ratio, ducts ...
Everything is studied to optenir an excellent engine efficiency. It mounts in combination with the original cylinder head without any problems.
We recommend a 17.5 to 21mm carburetor and a sport exhaust! With the prepared version, a 22 to 24mm carburetor can be used in combination with a sports exhaust!
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 85465.00
kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.
Reference: 64266.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 4 transfers with a long stroke crankshaft.
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 42115.00
Very torquey, robust and powerful kit for KREIDLER FLORET HP 4,8.
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 073600
80cc kit with inclined admission, more practical for certain carburetion assemblies!
Reference: 063600
ZUNDAPP is very robust and powerful!
Reference: 42105.00
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Reference: 85211.00.pr.st.1
The high engine without cylinder head, 70cc, for ZUNDAPP air cooling, big model with flaps!
Reference: 85307.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 012002435
A complete set of quality. Guaranteed performance!