Reference: 477400
Hose heatsink / radiator Ø17mm short square TUN’R CNC machined aluminum color of your choice
TUN 'R hose radiator ideal for giving style to your water circuit while cooling it. 56mm long so easy to integrate!
Banner
Ideal in case of breakage of your original calorstat or if you do not have one (removed by the mechanic or former owner) and you want to put one back. This TEKNIX calorstat is of good quality and of the original type. On large configurations, it should generally be removed to facilitate the passage of the liquid. But winter is not advisable. School opening 70 ° C.
The motorcycle, the scooter does not heat up properly and wear may occur faster than expected! The calorstat function works like this: it closes the inlet as long as the liquid is not hot in the engine…. It opens as soon as it is at the right temperature. This allows the engine to be at the right temperature and avoids having to heat the motorcycle too long.Generally, some do not recommend leaving it because it can be a problem (seizure due to wear). We recommend to leave the calorstat (except on very large configuration and again…) but to change it every 1 year or even 2 years! As the mechanical booklets advise.
Mounts on:
All mécaboites 50cc with MINARELLI am6 engine.
All 50cc MINARELLI lc engine scooters.
Reference: 477400
TUN 'R hose radiator ideal for giving style to your water circuit while cooling it. 56mm long so easy to integrate!
Reference: 150851
To replace your faulty temperature sensor on your 50cc box.
Reference: 21 0865
A high-end collar that can tighten your tightening stronger without risk of breakage.
Reference: 315.0023
POLINI bleed plug for 1/8 cylinder head with copper gasket
Reference: 11034
A good quality collar which allows you to tighten your tightenings more securely without risk of breakage.
Reference: 477403
Hose radiator or heat sink TUN 'R ideal to give style to your water circuit while cooling it.
Reference: 11026
A good quality necklace that can tighten your strongest clamping without risk of breakage.
Reference: 11031
A high-end necklace that can tighten your strongest clamping without risk of breakage.
Reference: AA00789
Indispensable in case of malfunction or wear of your original water pump.
Reference: 315.0028
Cooling screws for POLINI kit on PEUGEOT, MINARELLI ...
Reference: 11029
A good quality necklace that can tighten your tightening stronger without risk of breakage.
Reference: 111045
High quality liquid, protection down to -25 ° C. Ideal for cars, motorbikes, scooters, ...
Reference: 485279
With its 92mm long, this sink is one of the most efficient, very well done, they are available as polished aluminum color.
Reference: AA00792
Ideal to restore your old original part useless.
Reference: 311.0112
POLINI bolt connection for Minarelli or Piaggio and many other models.