- -30%
Reference: 517630
BLACKWAY ratchet tie-down, transport straps for motorcycle or other (set of 2)
Tie-down straps for transporting motorcycles or other.
Banner
Here is a click wrench (wrench) for spoke rims which will allow you to perform an assembly with high precision twists (measurements). Equipped with 9 clutches (end caps), you will have a wide choice of size as well as 2 types of clutches, 8 of square type and one has 6 grooves. The force is adjusted in NM (NEWTON-METER) extremely easily using the end of the key by pulling and turning.
Has high-end materials and great practicality. Its use is very easy, you just have to adapt the necessary tip and apply the exact torsion prescribed by the manufacturer. Its interchangeable tips can be assembled / disassembled via a rod. Each key is labeled with an inspection number. The value ranges from 0.2 to 17 NM. The conversion table will allow you to easily convert values to either Newton Meter (NM), Kilogram Meter (Kgm) or Foot Pounds (FT. LBS).
Very high quality, this 11 in 1 kit is a professional material that in the future will give you the possibility of repairing your rims or refurbishing them for good balance and good absorption on the road as in off-road or the super biker! Compact and solid, delivered complete as shown in the photo with a click-type torque wrench (wrench), a rod to remove the end pieces, 9 clutches, user manual with torsion conversion table, etc.
Features and content:
X1 click torque wrench
X1 rod
X1 6-groove clutch
X8 Clutches
(size 5.1 / 5.8 / 6.1 / 6.3 / 6.4 / 6.5 / 6.7 and 6.9mm)
X1 Notice
Reference: 517630
Tie-down straps for transporting motorcycles or other.
Reference: 476159
Sturdy, practical and effective tool for the maintenance of your brake pads & caliper!
Reference: 512309
Quality tool with specific material for better handling & use.
Reference: 512312
Quality tool with specific material for better handling & use.
Reference: 468303
Small model ATOO tool with 7 functions. Practical and takes up little space.
Reference: 512310
Quality tool with specific material for better handling & use.
Reference: 540025
A very practical tool to recover small pieces stuck!
Reference: 541050
Tools very well studied to be able to assemble and disassemble your 2 wheels with few tools. It should be known that the most used keys are 10, 13, 17 and 21. And thanks to this box only 4 keys are enough.
Reference: 541050C
Practical and effective tool for your mechanics sessions.
Reference: 7683
Large ATOO tool with 7 functions. Practical and takes up little space.
Reference: 517919
Quality chain edge for your 520, 525, 530 chain.
Reference: 517691
Tie-down straps for transporting motorcycles or other. Special handlebar grip!
Reference: 549795M
A box of 9 elongated BTR bits (ideal cylinder heads ...) allowing you to work quickly with adapted tools.
Reference: 478298
A plate wide & long handy to avoid losing the screws, washers or other small parts ...