
Reference: 242.047
X3 guide pins corrector POLINI SPEED DRIVE scooter PIAGGIO / MINARELLI
Ideal in case of loss, wear ... on your POLINI torque corrector.
Banner
The new MALOSSI 7.1 GREASE MRG RACING grease is born. Recommended for the most extreme uses or when the operating temperatures exceed 120/130 °.
MALOSSI 7.1 GREASE MRG RACING is a very high quality grease, prepared using highly refined mineral oils, thickened by complex aluminum soap and added by a balanced package of antioxidant, anti-rust, anti-wear and EP agents
The chemical composition gives very marked properties of adhesiveness, water repellency, resistance to oxidation, thermal shock and corrosion of metal surfaces.
MALOSSI 7.1 GREASE MRG RACING is indicated for the lubrication of variators and torque correctors for scooters, which work under severe load and temperature conditions.
Reference: 242.047
Ideal in case of loss, wear ... on your POLINI torque corrector.
Reference: 327417
Ideal for thread wear or other issues with your old clutch nut.
Reference: PI130491
Ideal for refurbishing your gear/transmission part on PIAGGIO housing.
Reference: 7615375B
High quality MALOSSI grease tube, perfect for lubricating the variator and torque corrector.
Reference: 909.208
Ideal in case of thread wear or other problems on your torque controller.
Reference: 2514311B
This part eliminates vibration and stabilize the operation of the torque driver.
Reference: 242.030
A high-end tube of grease to avoid any snagging or premature wear.
Reference: 06 9854E
Ideal if worn for a fresh start at a lower cost.
Reference: 19 9057B
Ideal in case of wear for a solid repair.
Reference: 285.0135
Ideal for the refurbishment of your part gear / transmission on casing MINARELLI & PIAGGIO.
Reference: 2512827
For a smoother and vibration-free ride.
Reference: 0612402E
Pair of seals ideal for maintenance or refurbishment of the half pulley MALOSSI checker !!!
Reference: 25 9464B
This spring guide eliminates vibration and stabilize the operation of the torque driver.
Reference: 242.031
O-rings essential for the correct functioning of the POLINI torque corrector!
Reference: 23 8272B
Ideal in case of wear to start anew.
Reference: 246.032
Small parts that allows the cooling of the torque control unit!