Reference: 06084350
Ø50mm AIRSAL piston for 80cc AIRSAL Sport kit on mécaboite driving DERBI EURO 3 & 4
Ideal in case of maintenance of your high engine!
Banner
Here is the very high-end ATHENA RACING piston for the 80cc Ø50mm kit on DERBI EURO 3 and euro 4 engine. This alloy model and specific manufacture is graphite. 2 ribs are available (to be selected according to the wear of your cylinder and its factory outlet dimension).
A = 49.95mm
B = 49.96mm
Delivered with its hard chrome domed segment pre-run in, its piston clips in C as well as its piston pin.
Reference: 06084350
Ideal in case of maintenance of your high engine!
Reference: 3413047.A0
Excellent for refurbishing your MALOSSI kit. Piston to be changed every 8,000 to 10,000 km!
Reference: 06085950
Replacement piston for your Airsal 80cc kit! To change every 5000km approximately.
Reference: G-463-BZ
Excellent for refurbishing your BARIKIT kit. Piston to be changed every 8,000 to 10,000 km!
Reference: 204.0829/A
Ideal for the maintenance of your kit 80cc Ø50mm POLINI DERBI EURO 1, 2, 3 & 4
Reference: 06084248
Replacement piston for your Airsal 70cc kit! To change every 5000km approximately.
Reference: H06089347
A good quality piston to change every 7000 kms which mounts on the 70cc cast AIRSAL.
Reference: G-520-BZ
Ideal for maintaining your high BRK special 45mm motor racing.
Reference: PI.02.476A.V
Complete replacement graphite single segment piston, ITALKIT top-of-the-range model for high engine kit in long stroke on DERBI engine.
Reference: PI.01.48A.VG
Complete replacement graphite mono segment piston, high-end model from VERTEX for high engine kit 70cc DERBI euro 3 and 4.
Reference: P-541
Spare piston Ø50mm for 80cc BARIKIT cast iron and aluminum kit with black graphite treatment.
Reference: 11334917
Piston mono complete segment of replacement, high-end model from BIDALOT for high engine kit 90cc DERBI euro 3 and 4.
Reference: PI.12.50A.I
ITALKIT high-end mono segment piston for 80cc kit in diameter 50mm on original crankshaft stroke. Installation on DERBI EURO 1, 2, 3 & 4.
Reference: 23156.02
Piston diameter 55mm PARMAKIT by VERTEX high end for minarelli am6.
Reference: 992701A
Replacement piston for your TOP PERFORMANCES 80cc cast iron kit! To change every 7000kms approximately.
Reference: 3411695.A0
Complete high-end piston for MALOSSI 80cc Ø50mm kit on AM6 & DERBI.