Reference: 30 3339
Transparent MALOSSI tank with cap for DELLORTO PHBG and PHBD carburettor
A quality transparent tank with plug for PHBG and PHBD carburettor.
Banner
Here is the POLINI inlet tulip machined in the mass of aluminum in anodized blue, signed with the POLINI logo. This tulip improves the venturi effect of your PHBG carburetor. The passage of the tulip has an internal diameter of 28mm up to outlet diameter 50mm. The finish and the angle are perfect! The diameter for installing an air filter is Ø48mm for optimal breathing and filtration.
Characteristics:
Internal diameter 28mm
External outlet diameter 50mm
Air filter fixing diameter 48mm
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 25 6408
Malossi extra-flat bush lid for Dellorto PHBG carburetor.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 40078900
Extra-flat valve cover for Dellorto PHBG carburettor.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!