Reference: 16962_00
bushel of screw cap for carburettor PHBG Racing Black and Red Edition
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Banner
Adjusting screw and setting accelerator cable without additional trimmer, thread size 19,70mm end Ø6mm surroundings. Thread length 12mm single, true DELLORTO. Ø 6,90mm for the sheath, internal diameter 3.5mm cable crossing. For carburettors DELLORTO. Also available with additional angled adjuster.
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 9482
The replacement cover for your DELLORTO PHBG carburetors except racing black edition.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.