Reference: 152122
kit of 4 sheets 20 X 15cm, joint board BA55 250°C multi-thickness fiber for car, mécaboite, scooter, mob, ... to be cut
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Banner
ATHENA RACING clutch housing gasket being mounted on PEUGEOT FOX moped. Very high quality, it will ensure a complete seal of the clutch housing and start again on a good basis during your reassembly. The quality of these gaskets is much higher than the original gaskets. Sold individually.
Reference: 152122
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Reference: 209.0192
To be replaced with each dismantling, the POLINI gaskets for 70cc liquid cooling kit on PEUGEOT 103!
Reference: S410420001001
Reinforced cylinder head gasket with high-end compression strapping.
Reference: P300000999002
Paste with elastic joint and resistant to high temperatures. (300 ° C). In a set of 12 tubes!
Reference: VJ.26.2
A high quality joint pack to refurbish your GILARDO 46mm on 103!
Reference: 440924
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: 256.0010
It is a seal with the best components that currently exist for a perfect seal. WARNING LAST ITEM AVAILABLE!
Reference: M813002000001
Paste with elastic joint and resistant to high temperatures. (300 ° C)
Reference: 14021846
For your 70cc liquid AIRSAL of 103, a change has every disassembly!
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 07 1928B
Special 8mm shim for long stroke crankshafts / long connecting rods RRD or MALOSSI on PEUGEOT 103.
Reference: cale_1mm_103_MALOSSI
Perfect for augmenting your diagrams on 103, fox and wallaroo.
Reference: 156189
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: M752504900094
High-end Viton O-ring for less friction and better sealing of your cylinder head.
Reference: 279134_cgn
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Reference: 152111
Ideal for creating your own engine gasket, carburetor and many other uses.