Reference: 1035531
Rear brake disc BREMBO round fixed for APRILIA RS50, SCARABEO, TUONO..
Ideal if your worn brake disc is back up
PEUGEOT 103
MBK 51
MOTOBECANE
PIAGGIO CIAO / VELOFAX
PEUGEOT FOX
HONDA CAMINO, PX, PXR...
DERBI VARIANT
SOLEX
PUCH
MINARELLI AM6
Low-pass exhaust pipe
High-pass exhaust pipe
DERBI Euro 3 / 4 / 5
DERBI Euro 1 & 2
MINARELLI P4 & P6
MINARELLI RV6, RV5, RV4, RV3
SUZUKI SMX, RMX, TSX
YAMAHA TY, RD, DT, MX
HONDA MB, MT, MTX, MBX, NSR R
YAMAHA CHAPPYBanner
FRANCE EQUIPEMENT rear brake disc! Cut from the best steels and manufactured in France, this disc can be mounted on motorcycles and scooters BETA 50 RR MOTARD, 50 TRACK, DERBI 50 GP1, MZ 125 SM at the rear.
It is not the most powerful disc but it will be more than enough for a daily use and a few intense sessions! Remember to take the good pads that go with (LMP390SR) which can also be used on trails, sports ... So you can go with your eyes closed.
Characteristics :
- External diameter: Ø220mm
- Internal diameter: Ø105mm
- Thickness: 4mm
- Number of holes: 6

Mounts on:
50 to Box BETA 50 RR Motard (-) (4 holes) 2012
50 to Box BETA 50 RR Motard (-) (4 holes) 2013
50 to Box BETA 50 RR Motard (-) (4 holes) 2014
50 to Box BETA 50 RR Motard (-) (4 holes) 2015 2016
50 to Box BETA 50 RR Motard (ZD3C3002) (4 holes) 2017 2018
50 to Box BETA 50 RR Motard (ZD3C4002) (4 holes) 2019 2020
50 to Box BETA 50 RR Motard Sport (ZD3C3002) (4 holes) 2015 2016 2017 2018
50 to Box BETA 50 RR Motard Sport (ZD3C4002) (4 holes) 2019 2020 2021
50 to Box BETA 50 Track 2010
50 to Box BETA 50 Track 2011
50 to Box BETA 50 Track 2012
50 to Box BETA 50 Track 2013
50 to Box BETA 50 Track 2014
2001 DERBI 50 GP1 2T scooter
Scooter DERBI 50 GP1 2T (PREDWB / SB) 2002
Scooter DERBI 50 GP1 2T (PREDXB) 2003
Scooter DERBI 50 GP1 2T (PREDXB) 2004
Scooter DERBI 50 GP1 Open 2T 2005 ABE
Scooter DERBI 50 GP1 Open 2T 2006 ABE
Scooter DERBI 50 GP1 Open 2T (PR1B1A) 2007 ABE
Scooter DERBI 50 GP1 Open 2T (PR1B1A) 2008 ABE
Scooter DERBI 50 GP1 Open 2T (PR1B1A) 2009 ABE
Scooter DERBI 50 GP1 Race 2T 2005
Scooter DERBI 50 GP1 Race 2T 2006
Scooter DERBI 50 GP1 Race 2T 2007
Scooter DERBI 50 GP1 Revolution 2T 2005
Scooter DERBI 50 GP1 Revolution 2T 2006
Scooter DERBI 50 GP1 Revolution 2T 2007
Scooter DERBI 50 GP1 V2 2T 2004
Scooter DERBI 50 GP1 V2 2T (PR1A1A) 2005
Scooter DERBI 50 GP1 V2 2T (PR1A1A) 2006
Scooter DERBI 50 GP1 V2 2T (PR1A1A) 2007
Scooter DERBI 50 GP1 V2 2T 2008
Motorcycle MZ 125 SM 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
Reference: 1035531
Ideal if your worn brake disc is back up
Reference: KF.003923
AP RACING by FRANCE EQUIPEMENT rear brake kit for the rear of your BETA 50 TRACK, DERBI 50 GPR.
Reference: FE.H431
Disk-original mounting holes 3, Ø160mm outside and inside 58mm, 4mm thick!
Reference: 484477
For insured braking! NG disc quality.
Reference: 00H01312531
Ideal to remake his rear brake system with high-end equipment, Ø218mm this model fits the DERBI senda DRD PRO. 6 fixing screws.
Reference: DF.4040 A
Ideal for rebuilding its rear braking system, this Ø180mm model is mounted on the rear on the DERBI senda after 2000. Fastening 3 screws.
Reference: FE.M408
Very high quality brake disc made in France in the best materials.
Reference: FE.B379V
Lighter and much more efficient than the original disc, the wave disc is also an aesthetic asset, this Ø218mm model can be mounted on YAMAHA DT and MBK X-LIMIT after 2003. 3 screw fixing.
Reference: 440746
Ideal to remake its rear braking system, Ø184mm model fits the GILERA GSM. 6 fixing screws.
Reference: FE.Y418V
Lighter and much more powerful than the original disc, the wave disc is also an aesthetic asset, this model Ø220mm mounts on YAMAHA TZR and MBK X-POWER after 2003. Fastener 5 screws.
Reference: 117
Ideal for rebuilding its rear braking system, this model Ø185mm mounts on SUZUKI SMX and RMX. Fixing 6 screws.
Reference: 465375
Ideal to remake its rear braking system, Ø218mm model fits the DERBI senda DRD. 3 fixing screws.
Reference: LMP421SM
AP RACING front and rear brake pad for motorcycle with 50cc and 125cc speed gearbox.
Reference: 485540
Ideal for rebuilding its rear braking system, this Ø220mm model is mounted on a 50cc motorcycle RIEJU RS3, SHERCO ENDURO, SUPERMOTARD, CHAMPION REPLICA ....
Reference: 483295
Ideal to remake its rear braking system, Ø200mm model fits the RIEJU. 3 fixing screws.
Reference: 465376
Quality record for MBK X-POWER and YAMAHA TZR.