Reference: 054967
PEUGEOT nylon wedging washer Ø16mm X Ø28mm X thickness 2mm for plate, pulley for moped Peugeot 103, MBK 51...
Excellent for having no play in your pulley / chainring. Attention limited quantity!
Banner
This DOPPLER pulley from the OPEN range consists of a plate entirely cut in the mass in a very high quality aluminum. Its silver anodized finish allows it to fight against oxidation.
The steel pinion, which is anti-corrosion treated, acts as a centering device in the chainring and is adjusted to reduce skipping phenomena.
The 5 screws make it possible not to have any shearing thanks to their countersunk heads which, of course, are conducive to fighting against loosening.
Composition :
- 1 Ø213mm aluminum plate, for belt with original width.
- 1 steel pinion (10 or 11 teeth)
- 2 sealed needle bearings HK1616-2RS.
- 5 FHC M5 x 15 screws.
Don't forget to select the number of teeth before adding to the basket!!
Assembly advice:
The countersunk head screws are to be tightened crosswise, to a torque of 4.5Nm.
Grease the needle roller bearings before fitting, then every 4500 kilometers if necessary, or every year.
Mounts on:
MBK 51V (50cc)
MBK MAGNUM RACING (50cc)
MBK MAGNUM RACING XR (50cc) ...
Reference: 054967
Excellent for having no play in your pulley / chainring. Attention limited quantity!
Reference: 1969
What finally to offer acceleration to your PEUGEOT 103 SP, MV, MVL ... And what to be able to put a racing variator while preserving a clutch so not to be in direct drive!
Reference: 159646
A piece that will give you a beautiful sporty and efficient TUNING appearance.
Reference: 367902
A very good quality pulley for the DOPPLER or GIRAUDO clutch pulley of your PEUGEOT 103 (except SPX / RCX) and MBK 51... Available in 10 or 11 teeth!
Reference: 715378
Reinforcement plate for your moped!
Reference: 867
A high-end, ultra-reinforced socket and all this at an affordable price.
Reference: 369871
A reinforced and lighter clutch set for better grip and lifespan.
Reference: 10181
A piece that will give you a beautiful sporty and efficient TUNING aspect.
Reference: 8806
Ideal for a refurbishment of your machine.
Reference: 800
Ideal for restarting, mounts on pulley ER2 DOPPLER all models also on the original clutch pulleys of SPX / RCX / CLIP / MVX.
Reference: 199582
A piece that will give you a beautiful sporty and high-performance TUNING appearance.
Reference: 503409
The replacement clutch housing of the DOPPLER ER2 clutch pulley.
Reference: S715385
Ideal for winding without a game with a lower-cost quality product.
Reference: 533681
A quality product at a low price. for 103 SP, MV, MVL, VOGUE ...
Reference: 508550
Ideal for starting fresh, mounts on ER86 DOPPLER pulley all models also on the original SPX / RC X / CLIP / MVX clutch pulleys.
Reference: 702
The original spare pulley shaft in 24 teeth for PEUGEOT 103 mopeds.