Reference: 6635
Needle sleeve PEUGEOT ORIGIN of pulley Ø22 X Ø16 X length 18mm for Peugeot 103, MBK 51 HK1618
An original PEUGEOT HK1618 socket, very high quality.
Banner
Here is the new ER86 pulley from DOPPLER. This evolution of the clutch pulley DOPPLER ER2 mainly offers a big improvement! That of being able to adjust by advancing or delaying the grip of the clutch and without any disassembly, through the ventilated bell!
The bell is also very evolved, it is a ventilated scooter bell, reinforced and perfectly balanced for the higher rotational speeds. The 3-jaw clutch is a model scooter, it is also quite suitable for very high speeds, high temperatures and prolonged ... This pulley, more advanced is particularly suitable for those seeking maximum performance in hot springs acceleration and recovery!
With a lightly tuned variation, a powerful engine that only requires turns and a good spring motor, you will get acceleration and lightning rises, while having a nice clutch pulley (which vibrates less) and robust!
Delivered with pinion of 11 teeth
Mounts on PEUGEOT 103 SP, MV, MVL, LM, VOGUE, CHRONO, 104, GL10, TSE ... (Does not mount on PEUGEOT 103 with kick SPX, MVX, CLIP and RCX).
Reference: 6635
An original PEUGEOT HK1618 socket, very high quality.
Reference: S715386
Ideal for winding without a game with a lower-cost quality product.
Reference: 8806
Ideal for a refurbishment of your machine.
Reference: 503409
The replacement clutch housing of the DOPPLER ER2 clutch pulley.
Reference: 848
A good quality (bare) tray for a low price.
Reference: 800
Ideal for restarting, mounts on pulley ER2 DOPPLER all models also on the original clutch pulleys of SPX / RCX / CLIP / MVX.
Reference: 485297
Ideal in case of breakage or wear of your old circlip.
Reference: 533681
A quality product at a low price. for 103 SP, MV, MVL, VOGUE ...
Reference: 511877
Excellent for not having play in your pulley / chainring. Attention limited quantity!
Reference: 1969
What finally to offer acceleration to your PEUGEOT 103 SP, MV, MVL ... And what to be able to put a racing variator while preserving a clutch so not to be in direct drive!
Reference: 4269
Ideal for reassembly without play at a lower cost.
Reference: 3005
A superb lightweight and aesthetic pulley with 11 tooth pinion for your 51, in machined aluminum.
Reference: 517369
Quality pulley for your 103 moped!
Reference: 8815
Ideal for reassembly without play with a quality product at a lower cost.
Reference: 702
The original spare pulley shaft in 24 teeth for PEUGEOT 103 mopeds.
Reference: 517368
Quality pulley for your MBK 51 moped!