Reference: 35 7259
Set of 2 segments chrome for kit MALOSSI aluminum 70cc Ø47mm
Ideal in case of loss of compression and to put your high engine to nine.
Banner
For more performance and solidity on vertical minarelli, one of the solutions is to put a kit with piston in axis of 12mm, of course you will need the crankshaft for axis of 12mm appropriate. The piston d.47mm 12mm MHR axis for the 70cc aluminum MHR kit with bar for vertical minarelli and the MALOSSI MHR replica kit only . This piston is also the replacement model for MALOSSI MHR REPLICA phase 1 Ø47mm kits on minarelli am6. Excellent quality, treated, 2 thin hard chrome domed segments… a must have for vertical, in addition, it has side grease nipples! Supplied with 12mm axle, piston ring and clips in G.
Select your lettering A / B / C / D according to the wear of your kit, the lower the letter, the lower the piston has a rating.
Example :
A for kit which has from 0 to 5000km
B for kit which has from 5000 to 9000km
VS…
D ...
Reference: 35 7259
Ideal in case of loss of compression and to put your high engine to nine.
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 2311783B
Piston pin with shaped clips "C", essential for refurbishment quality and reliable.
Reference: H06138248
A good quality piston to change every 7000 km that mounts on the AIRSAL iron 70cc.
Reference: PI.44.48A.I14
Excellent quality replacement piston for ITALKIT 80cc Ø48mm minarelli am6 kit.
Reference: 06135850
A good quality piston, delivered complete for a refurbishment of your cylinder.
Reference: 229.0591
A good quality piston and finish changing every 5,000 to 6,000 km maximum for peak performance.
Reference: 3411695.A0
Complete high-end piston for MALOSSI 80cc Ø50mm kit on AM6 & DERBI.
Reference: G-469-BZ
Piston BARIKIT sapphire blue kit Ø50mm for minarelli am6.
Reference: 11335966
Piston forged high-end parts for kit BIDALOT FACTORY 86, 88 and 94cc on DERBI, AM6 Minarelli and Horizontal.
Reference: 57840.02A
Piston by VERTEX mono high-end segment for kit 80 and 90cc diameter 50mm.
Reference: P-269-1SA
Full Replacement Piston for 75cc kit Ø48 mm aluminum BARIKIT on minarelli am6 and DERBI GPR 75cc.
Reference: 23156.02
Piston diameter 55mm PARMAKIT by VERTEX high end for minarelli am6.
Reference: PI.63.50A.I
VERTEX very high quality piston, specifically for TOP PERFORMANCES aluminum kits (maxikit TPR 86cc, 80cc TPR kit ...) on minarelli am6!
Reference: G-520-BZ
Ideal for maintaining your high BRK special 45mm motor racing.
Reference: PI.44.480A.V
Piston mono segment complete spare graphite, top model home VERTEX for kit high 75 and 80cc with 90mm rod on am6.
Reference: PI.44.49A.V
Piston mono segment complete spare graphite, top model home VERTEX for high engine kit 80cc and 75 with normal race and normal rod on minarelli am6!
Reference: 9906831
Replacement bi-segment piston for DR Racing & TOP PERFORMANCES Black cast iron 75cc kit.
Reference: PI.63.490.M
Piston complete bi segment of high-end replacement for high engine am6 kit.