Banner
The spare pinion for your MBK 51, MOTOBECANE ... Choice of number of teeth to vary speed or acceleration.
Here is the chain sprocket for the chainring of your MBK 51! CGN selection, this pinion is installed on the original or aluminum chainring (DOPPLER type) depending on the model, some chainrings require a Peugeot 103 pinion to be installed because they have a Ø28mm hub. Good quality, its internal diameter is Ø26mm. It also has 2 black plastic shims / gaskets for better timing / anti-friction of the chain depending on the teeth chosen! Delivered as shown in the photograph with a number of teeth to choose from (11/12 or 13 teeth). To be adapted according to your crown / chain / pinion transmission.
Be careful to choose the number of teeth before purchase. Width only available 415.
Specific References
Reference: 504842
A box of complete circlips which will allow you to make all your repairs, changes. Clips for pinion, gearbox, toe-clip, variator, ...
Reference: 485297
Ideal in case of breakage or wear of your old circlip.
Reference: E367.11
Ideal if worn or simply set your transmission. HIGH QUALITY!
Reference: 049797
An enhanced original gear at PEUGEOT perfect to keep a strong and reliable vehicle.
Reference: 138784
Ideal in case of wear to rebuild your transmission.
Reference: E1368.10
Pinion made in France in the best steels! High quality!
Reference: 855
Ideal in case of wear or to simply adjust your transmission.
Reference: 182343
Quality sprocket for your moped!
Reference: E224.11
High quality pinion made in France in the best steels!
Reference: 860
Ideal in case of wear or to simply adjust your transmission.
Reference: 1100.E364.14
Pinion made in France in the best steels, 14, 15, 16 or 17 teeth to choose from!
The spare pinion for your MBK 51, MOTOBECANE ... Choice of number of teeth to vary speed or acceleration.
