- -40%
Reference: 16962_00
bushel of screw cap for carburettor PHBG Racing Black and Red Edition
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Banner
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 8431
tank gasket for GURTNER carburetor.