Reference: EQ-921-S
Kit 75cc Ø48mm aluminum BARIKIT Racing minarelli am6
Top BARIKIT aluminum engine with 5 transfers, piston mono segment, exhaust with bar and incoming high compression cylinder head. Guaranteed performance!
Banner
Attention, prohibited on the road, reserved only for competition.
Here is the latest cylinder from BIDALOT in 70 cm3 for your Minarelli AM6. This cylinder is really a huge step forward for the AM6 engines. Everything has been reviewed and improved to increase the performance and reliability of the cylinder. This cylinder is composed of 7 transfers in all. 4 intake 3 sweep and 3 exhaust. The booster exhaust will offer you more solidity than a bar exhaust and it will allow you a very good high speed thanks to a maximum opening in width of the exhaust. The cylinder head is a machined block model which is not studded, however the cooling has been so well reviewed that it is therefore not necessary to do it in 2 parts. With such an architecture it is as powerful as an 80 cm3 AM6 MHR for example while being more nervous. As usual, BIDALOT does things well by including reinforced studs, cylinder head nut, screws, etc. However, we regret that the needle cage is not delivered with it. The cylinder comes with several exhaust adapters to mount it on 90% of exhausts on the current market. Have
This pack contains:
x1 cylinder
X1 mono segment piston
X1 segment Chromed steel Ø47.6, domed ground, made in Japan
X1 piston pin in 12x39mm
X1 full seal pack
X4 Reinforced cylinder stud
x4 exhaust screw
x4 cylinder head nuts
X1 cylinder head
X1 exhaust flange Ø28mm x L30mm
X1 exhaust flange Ø30mm x L30mm
X1 exhaust flange Ø32mm x L30mm
This high engine is mounted on the following 50cc motorcycles with gearbox equipped with the MINARELLI AM3, AM4, AM5, AM6 euro 1, AM6 euro 2 engine:
-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, beware of engines upgraded to DERBI euro 3)
-APRILIA RX AM6 engine (after 2006, beware of engines upgraded to DERBI euro 3)
-APRILIA MX AM6 engine (after 2006, beware of engines upgraded to DERBI euro 3)
-BETA CRE
-BETA RR
-BETA RR ALU
-HONDA HM-HONDA CRE
-HONDA BAJA
-HUSQUVARNA WXE
-HUSQUVARNA CH
-HM DERAPAGE-HM CRE
-MALAGUTI DRAKON
-MALAGUTI XTM-MALAGUTI XSM
-FANTIC CABALLERO
-PEUGEOT XP6-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6-PEUGEOT XR7
-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX
-RIEJU RS1-RIEJU RS2
-RIEJU RS2 MATRIX - RIEJU RS2 MATRIX PRO - RIEJU SMX
-RIEJU MRX-RIEJU SPIKE
-KEEWAY TX EN
-YAMAHA DT-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER
-SHERCO SM-SHERCO ENDURO
-SHERCO HRD-SHERCO ENDURO
And many other machines!
Reference: EQ-921-S
Top BARIKIT aluminum engine with 5 transfers, piston mono segment, exhaust with bar and incoming high compression cylinder head. Guaranteed performance!
Reference: 3112228
A ratio power / torque / unbeatable strength !!!
Reference: 9919240
A high performance racing engine, solid and reliable for minarelli am6. Kit with one-piece cylinder head.
Reference: 01133348
Stronger and torquey than the 48mm standard, made in spain, this AIRSAL also has better piston! Ideal for riding every day in a country or are allowed big kits!
Reference: 53430.00
One of the most powerful kits 80cc markets original race.
Reference: 01131448
The cheapest aluminum cylinder made in Spain, the AIRSAL is of good quality and offers good performance for a reduced price.
Reference: 3112386
The famous MHR TEAM 80cc for am6, standard race and original size transfers of course ... But what power! What a couple and what solidity !! One of the best normal races on the market!
Reference: 075700
The ATHENA sport is certainly the best aluminum for a small budget, of very high quality, it is solid and very efficient! A perfect torque / power ratio.
Reference: EQ-1033-S
The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head incoming combustion chamber! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....
Reference: 01134950
A large diameter 50mm aluminum at a low price! This AIRSAL luxury version 80cc offers a lot of torque to the engine minarelli am6, compared to the original version, it has a piston high-end segment!
Reference: 133.1009
The famous 80 large cast iron POLINI kit for the am6 engine.
Reference: CK.44.780.GR2
The direct competitor of MALOSSI MHR TEAM cylinder with its 308-3 GILARDONI (Special skirt exhaust has boosters, 6 transfers), the cylinder head has stud, its very well defined diagrams ... For am6!
Reference: 10059909
A high complete aluminum engine, efficient, solid and reliable, a real power monster little known to the general public.
Reference: 11000062
A highly efficient and robust kit, the famous BIDALOT have nothing to prove!
Reference: H01138248
Solid, inexpensive, excellent torque-to-power ratio ...
Reference: 53440.00
The biggest market kit for MINARELLI AM6 engine !!! A big Ø55mm diameter, 39mm in race to pose with a home run! A true torque monster.