Reference: 85207.00
Kit 70cc Ø45mm PARMAKIT for ZUNDAPP SUPERTERM, CS50, KS50 ...
The complete kit 70cc for ZUNDAPP with its cylinder head!
Banner
Part which has become very rare, here is a kit for vintage 50 2T motorcycle engines from the Belgian manufacturer FLANDRIA RECORD, APPOLO, BERMUDA, AMICO, MINI FUTURA, SP 847, SP 837, SP 247 ... (check the shape of your cylinder before purchase). This kit is delivered to you complete as in the photo.
This high performance kit from PARMAKIT is very robust, powerful and torquey! It allows in addition to the refurbishment, a nice increase in the power of the machine!
It consists of a nicasil-treated aluminum cylinder with two intake transfer + a blind rear, a single-segment vertex piston! Diagrams, compression ratio, ducts ...
Everything is studied to optenir an excellent engine efficiency. It mounts in combination with the original cylinder head without any problems.
We recommend a 17.5 to 21mm carburetor and a sport exhaust! With the prepared version, a 22 to 24mm carburetor can be used in combination with a sports exhaust!
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 85207.00
The complete kit 70cc for ZUNDAPP with its cylinder head!
Reference: 020306435
Very good little aluminum kit for MORINI M1 engine, M101, M1ES, M1K ... 50 2T!
Reference: 85445.00
The high complete engine with cylinder head, 70cc, ZUNDAPP for air cooling, small model valves!
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 64450.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a short stroke crankshaft.
Reference: 073800
The most powerful kit on the market for SACHS has cylinder head connected to the cylinder! Full version with clamshells!
Reference: 64425.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 30122.00
Kit very torquey, robust and powerful for GUZZI DINGO 50cc 2T.
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 64263.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 2 transfers with a long stroke crankshaft.
Reference: 003800
80cc kit of very high quality, complete with valves and pipe for motorization MORINI era!
Reference: 64165.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12 with 4 transfers with a long stroke crankshaft.
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.