
Reference: 050800
Ø39mm TNT piston for TNT kit Original type aluminum MBK 51 / motobecane AV 10
In case of wear, breakage or lack of compression, a quality replacement piston at a lower price.
Banner
Here is the kit / cylinder - piston from TNT, The cylinder is an AIRSAL T4 base, so it has 2 side transfers and 2 rear transfers, the nykasil is of very good quality, aluminum too. Lepiston has a half moon back to improve scanning. This cylinder with slightly higher diagrams than the original offers some additional performance. The channels are very clean and the oval exhaust is wider than the original rectangular one.
This cylinder will therefore be a very good compromise for a refurbishment of your original engine and this for a really attractive price.
The piston has 2 segments 1.5mm thick, thinner than the original, they will limit friction and allow better high speeds. For this price, what more could you ask for!
The pack contains:
Piston
Segments
Piston clips
Piston pin
Cylinder
Pack seals
As an option we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 050800
In case of wear, breakage or lack of compression, a quality replacement piston at a lower price.
Reference: 134.0316
The famous kit POLINI MBK 51 with exhaust liquid W. The best 50cc lc with MALOSSI!
Reference: 4107
Ideal for an original type refurbishment at a low price.
Reference: 134.0302
Now out of production!
Reference: 032101
A kit almost identical to the origin but at half the price. One way to get your AV10 back up and running without spending too much.
Reference: 009400
A high performance 50cc engine and solid!
Reference: 504019
The most powerful kit in 50cc liquid cooling for your MBK 51.
Reference: 197252
A good mono segment kit very well known and very well known for av10 engines.
Reference: 504020
The most efficient 50cc liquid cooling kit for your MBK 51.
Reference: 51303.00
A very good little kit 50cc 6 transfers of admission and mono-segment for more performances than the origin!
Reference: 502015
A good quality cylinder sold without gasket or cylinder head.
Reference: 475522
The complete kit for MBK 51 liquid!
Reference: 31 6864
The real G1 replica kit for MBK 51, aluminum oval exhaust, intake 6 transfers, great ration torque / power in charts! High quality manufacturing.
Reference: 11001213
Out of production!
Reference: 11000313
Out of production.
Reference: HM34
Very high performance 50cc G1 kit for MBK 51 / AV10 engine, air cooled.
Reference: 31 5477
The famous MALOSSI G2 REPLICA kit for MBK 51 liquid cooling, solid, torquey and powerful!