Cylinder shim / 1mm RRD aluminum base gasket for MBK 51 / av10 motobecane

Reference: 195427

Viton Ø45 X 2.5mm O-ring cylinder head gasket for DOPPLER cylinder head on Peugeot 103, MBK 51, SCOOTER ...

Premium Viton O-ring for less friction and better sealing of your cylinder head.

Reference: S410420012001

Round exhaust gasket ATHENA copper Ø30mm (to screw) for MBK 51, Peugeot 103, fox & wallaroo

High quality seal from ATHENA.

Reference: 009403

Pack joint for kit 50cc ATHENA Racing Ø39mm air on MBK 51 / av10 motobecane

For high engine without leakage and without compression loss!

Reference: 506480

Bilge cylinder / seal aluminum base 0.5mm DOPPLER for MBK 51 / av10 motobecane

Cale 0.5mm aluminum containing the original transfer form!

Reference: P400360600002

Kit high motor joint (5 pieces) ATHENA for MBK 51 AV10 engine

For a high engine without leakage and loss of compression!

Reference: 4127

TEKNIX base gasket for original cylinder MBK 51 motobecane AV10

Reference: JT51.20

Base joint MVT for cylinder 50cc and 70cc for MBK 51

Quality seal, essential for refurbishing the motor seal of your bikebecane.

Reference: S410360006003

ATHENA racing base gasket for original cylinder MBK 51 motobecane AV10

Quality seal, essential to refurbish the engine seal of your motobecane.

Reference: 11 6538

O-Rings of cylinder head for kit 50cc MALOSSI G2 and G2 replica MBK 51 / motobecane av10

A top-of-the-range seal pack, ideal for winding without leakage.

Reference: 11 8945B

Pack joint for kit 50cc Ø39mm MALOSSI liquid G2 (GR2) on MBK 51 / av10 motobecane

Gasket set for MALOSSI G2 liquid cooling on MBK 51 / av10 motobecane engine.

Reference: 11501117

BIDALOT base gasket thickness of your choice for G1 OPEN MBK 51 / motobecane av10

Base gasket specific to G1 / G2 OPEN Racing 2013 crankcases / cylinders.

Reference: CALE-AV10-0.5mm

Cylinder/aluminium base seal P2R for MBK 51 / motobecane av10 (Width of choice)

1mm aluminium cale incorporating original transfer shapes! Be careful, low-cost holds because there is a slight machining defect!!! May need to be slightly corrected in order to adapt to the cylinder fut & also to the stud holes as the centrepiece is slightly shifted from the original one

Reference: TCU46

O-shaped head joint viton Ø48 X 2mm for head MVT 46mm AIR for 103 and MBK 51

O-ring in high-end viton for less friction and better sealing of your head.

Reference: 514551

Cylinder shim / aluminum base gasket 0.4mm CGN for MBK 51 / av10 motobecane

0.4mm aluminum wedge incorporating the original transfer forms!

Reference: 209.0181

Pack joint for kit 50cc Ø39mm POLINI air on MBK 51 / av10 motobecane

Reference: 506481

Cylinder shim / 1mm aluminum base gasket DOPPLER for MBK 51 / av10 motobecane

1mm aluminum wedge incorporating the original transfer forms!