Reference: 8542
P2R Ø15 bent pipe by 19mm SHA for MBK 51 / av10 motobecane
Pipe for 15 or 16mm SHA carburetor.
Banner
MALOSSI angled aluminum intake pipe for flexible mounting, this model has an anti-slip lip for the flexible sleeve, we recommend it with a PHBG preferably Ø19 to 21mm. This is the pipe used in the MALOSSI 15 pack for MBK 51. It is blasted internally to prevent gas rebounds. It was designed for MBK 51 with original casings, MALOSSI valves will be very well suited with this intake pipe.
On the aesthetic side, malossi is indicated on the side, for its assembly provide a stud, one of the 4 holes is rather badly placed and prevents the passage of a screw and it is therefore necessary to use the stud / nut technique.
Reference: 8542
Pipe for 15 or 16mm SHA carburetor.
Reference: 02 6039B
A pipe created to match a 21 PHBG carburetor. This pipe is micro-blasted to prevent gas rebounds. Clearly it will mount a larger carburetor while gaining power.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 02 6704
A pipe especially for MALOSSI G2 housing but few also be mounted on DERBI EURO 1, 2 and 3. It was created to mount your 24mm carburetors (RIGID PHBG or with flexible sleeve for passage).
Reference: 215.0242
Top model ideal for mounting a carburetor SHA 15 or 16mm on your MBK 51.
Reference: 365952
A perfect pipe for mounting a carburetor in flexible mounting with a diameter of 17 to 21mm. It is very short and very well ventilated to have a good gain in power.
Reference: 215.0245
High-end POLINI 15mm diameter valve box for MBK 51.
Reference: 51305.05
For performance and strong motor! Accompanied with a rigid SHA carburetor 15 to 16mm.
Reference: 928.270.006
POLINI pipe for THOR engine or adaptation on PEUGEOT 103 / MBK 51 requiring an elbow admission!
Reference: 1411
At a good price and ideal to accompany a 17.5 to 20 mm PHBG carburetor on your MBK 51.
Reference: 1408
At a good price and ideal to accompany a 14 to 16mm SHA carburetor on your MBK 51.
Reference: 1415
A pipe with a correct finish that will go very well with a carburetor 14 to 16mm in SHA.
Reference: 1314916B
Ø32mm spare sleeve angled at 90 ° internal for MALOSSI admission kit on VESPA 80, 125, 200 ...
Reference: 159643
At a good price and ideal to accompany a 15 mm PHBG and SHA 14-15-16 carburettor on your MBK 51.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: 215.0350
Ideal in case of breakage, wear your old pipe ... special admission for casings POLINI engines.