Reference: 215.0462
copy of POLINI Evolution directional intake pipe 15 to 21mm carburetor (Ø23 to 25mm fixing) mécaboite driving DERBI and AM6
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Banner
Here is a flexible intake pipe from TNT for mécaboite driving DERBI euro 1/2 and 3. Equipped with an outlet for separate lubrication, depression or even lung, you can also plug this outlet without any problem. Delivered as presented, its design is good, withstands vibrations very well, very short and the output is well diffused….
Being entirely in rubber, no need for a gasket because they are integrated into the pipe, it does not conduct heat in any way, avoids all gas rebounds, it is supplied with a steel support for optimized tightening any reinforcement! Excellent value. Finally, we recommend it in the company of a flexible carburetor (male) with a diameter of 17.5 / 19/20 or 21mm DELLORTO PHBG, PHB, PHBA or other models. This pipe has a Ø24mm fixing entry .
Reference: 215.0462
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 23120.20
Complete intake kit and high-performance 30mm diameter for your mécaboite DERBI.
Reference: 25527
Pipe of admission with rigid and flexible venturi sleeve, excellent quality, good price!
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 215.0463
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 467795
A very well finished pipe that will absorb vibrations and all this at a low price.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 215.0417
Pipe 21mm POLINI high quality, ideal for laying a PHBG 19 or 21mm.
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 9931740
TPR intake kit, 360 ° swivel, flexible assembly specially designed to accompany an OKO, PWK POLINI, FURYTECH, KEIHIN ... 24 to 28mm carburetor on AM6 & DERBI Ø34mm mounting.