Reference: 215.0428
POLINI Evolution directional intake pipe 28 to 30mm carburetor (Ø35 to 39mm fixing) mécaboite driving DERBI and AM6
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Banner
The PARMAKIT intake kit for derbi is a model originally planned for 30mm carburetors. It is a flexible assembly and offers the possibility of separate greasing depression or if desired. The flexible sleeve is provided for carburetors in 36mm diameter mounting with anti-dérapement lip.
The valves are dipped 6 models in black fiber lamellae (glass) 0.30mm, we regret the absence of a diffuser, a good trainer will be able to made a tuned to the intake pipe. It comes with 2 sleeve clamps and gaskets 2 admission. There is also a red connector for carburetor, it go up on DELLORTO with mounting air filter thread 40mm, this connection allows you to switch to 45 or 37mm.
If you want to mount the slats of a specific thickness or carbon MALOSSI blades will install it without problems, POLINI also.
Reference: 215.0428
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: LC.12.40
One of the best value for carburetor in 28 to 35mm. Reserved for connoisseurs!
Reference: 467795
A very well finished pipe that will absorb vibrations and all this at a low price.
Reference: 215.0427
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 1772
A very well finished pipe that will absorb vibrations and all this at a low price. In addition to this, you need to know more about it.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 215.0440
Special intake pipe for POLINI carburettors CP 23 and 24mm on mécaboite DERBI. 360 ° rotatable with 30 ° inclination angle.
Reference: 215.0462
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 215.0455
Ideal for equipping a large, precise and efficient engine configuration! 360° swivel with 20° tilt angle.
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 140619
An original type intake pipe, good quality and less expensive than the original in concession.
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.