- New
Reference: 02 6639B
Flexible MALOSSI pipe Ø28 by 46mm for MALOSSI MG, Minarelli am6 and DERBI euro1,2 & 3
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Banner
Here is the admission pipe POLINI Oriental evolution for MINARELLI AM6 engine mecaboite! She also climbs on some DERBI if desired, and on specific engines like PEUGEOT 103 SPX with carters MALOSSI, MBK 51 with EUROCILINDRO carters or with carters POLINI and adaptor RRD.
This pipe is really on top, first of all you guide it as you wish to place the carburettor as you want! Its position is intended for PHBG or other model carburetors and its internal diameter is provided for carburetors of 15 to 21mm. Its fixation diameter is Ø23 to 25mm. To avoid harmful vibrations and cuts, the sleeve is in specific glass.
Hard enough for the pipe to crack and not break during the clamping. Even on the aesthetic side you feel that POLINI really treated this room to the maximum. Needless to put a joint, a joint is pre-integrated to the junction, plus it is delivered with notice, visserie.. Clearly, thanks to perfect diffusion, vibration absorption, good position.. The performance gain will be well present and felt!
-For carburettor DELLORTO PHBG, carburetors type PHBG... and other models 19 to 21mm.
-For carburetors POLINI CP from 15 to 21mm.
-Fixing of carburettor Ø23 to 25mm.
-Internal diameter 21 to 24mm.
-tilt angle 43° and length 68mm
-Orientable 360°
A= Ø25mm
B= 21
C= 43°
Mounting on:
APRILIA: AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 MINARELLI AM6 - RX 50 MINARELLI AM6 - TUONO 50 Minarelli AM6
MINARELLI: AM3 - AM4 - AM5 - AM6
SALE: BAJA 50 Minarelli AM6 Euro4/5 - DERAPAGE 50 Minarelli AM6 Euro4/5
FANTIC MOTOR: CABALLERO 05 Minarelli AM6
HM: CRE 50 SIX 2003/2005 Minarelli AM6 - DERAPAGE 50 2001/02 Minarelli AM6 - DERAPAGE 50 2003/05 Minarelli AM6
MALAGUTI: DRAKON 50 - XSM 50 Minarelli AM6 - XTM 50 Minarelli AM6
YAMAHADT 50 R MINARELLI AM6 - DT 50 SM MINARELLI AM6 - TZR 50 MINARELLI AM6
SHERCO: HRD ENDURO MINARELLI AM6 - HRD SM MINARELLI AM6
RIEJU: MRT, MRX MINARELLI AM6 - SMX MINARELLI AM6 - SPIKE MINARELLI 2006
BETA: RR 50 AM6 (1999-2002) - RR 50 ENDURO, MOTARD 50 ALU AM6 2003 - RR 50 SM AM6 (2002-2004)
MBK: X-LIMIT 50 Minarelli AM6 - X-POWER 50 Minarelli AM6
PEUGEOT: XPS 50 SM MINARELLI AM6 - XPS 50 T MINARELLI AM6 - XR6 50 MINARELLI AM6
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 512119
A very well designed intake pipe, ideal to accompany a high engine configuration.
Reference: 9919270
Pipe replacement inlet diameter 24mm carburettor MIKUNI TM24 or other flexible mount models.
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 215.0397
Pipe of admission Ø19mm, ideal for laying a rigid 21mm PHBG 17.5 has a motorcycle that requires a bent pipe as the Aprilia RX, MX 50 ...
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 0211199B
21mm pipe for HONDA MB, MT, MTX 50 / MINARELLI AM6 50 ...
Reference: 25526
A quality aluminum pipe to replace the old one.
Reference: CT00746
A good quality pipe with an almost perfect finish for a more than affordable price!
Reference: 075805
An intake pipe very well designed, ideal to accompany a push engine configuration.
Reference: 590
A pipe that will increase performance while spending little.
Reference: 269801
A pipe that will gain in performance while spending little.
Reference: LC.44.400
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Reference: 467799
The unbeatable quality / price / practicality ratio for your am6 engines!
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 215.0463
For an improved admission and a good performance gain! Orientable 360° with tilt angle at 43° more pronounced than normal!