Banner
For an improved admission and a good performance gain! Orientable 360° with tilt angle at 43° more pronounced than normal!
Here is the admission pipe POLINI Oriental evolution for MINARELLI AM6 engine mecaboite! She also climbs on some DERBI if desired, and on specific engines like PEUGEOT 103 SPX with carters MALOSSI, MBK 51 with EUROCILINDRO carters or with carters POLINI and adaptor RRD.
This pipe is really on top, first of all you guide it as you wish to place the carburettor as you want! Its position and internal diameter are provided for carburzers of 23 to 24mm as MIKUNI TM24 and POLINI CP. Its fixation diameter is Ø27 to 28mm. To avoid harmful vibrations and cuts, the sleeve is in a specific glass.
Hard enough for the pipe to crack and not break during the clamping. Even on the aesthetic side you feel that POLINI really treated this room to the maximum. Needless to put a joint, a joint is pre-integrated to the junction, plus it is delivered with notice, visserie.. Clearly, thanks to perfect diffusion, vibration absorption, good position.. The performance gain will be well present and felt!
-For carburettor MIKUNI TM24
-For carburetors POLINI CP 23 and CP 24 and CP EVOLUTION
-Fixing of carburettor Ø27 to 28mm.
-Internal diameter 25mm.
-tilt angle 43° and length 68mm
-Orientable 360°
A= Ø25mm
B= 21
C= 43°
Mounting on:
APRILIA: AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 MINARELLI AM6 - RX 50 MINARELLI AM6 - TUONO 50 Minarelli AM6
MINARELLI: AM3 - AM4 - AM5 - AM6
SALE: BAJA 50 Minarelli AM6 Euro4/5 - DERAPAGE 50 Minarelli AM6 Euro4/5
FANTIC MOTOR: CABALLERO 05 Minarelli AM6
HM: CRE 50 SIX 2003/2005 Minarelli AM6 - DERAPAGE 50 2001/02 Minarelli AM6 - DERAPAGE 50 2003/05 Minarelli AM6
MALAGUTI: DRAKON 50 - XSM 50 Minarelli AM6 - XTM 50 Minarelli AM6
YAMAHADT 50 R MINARELLI AM6 - DT 50 SM MINARELLI AM6 - TZR 50 MINARELLI AM6
SHERCO: HRD ENDURO MINARELLI AM6 - HRD SM MINARELLI AM6
RIEJU: MRT, MRX MINARELLI AM6 - SMX MINARELLI AM6 - SPIKE MINARELLI 2006
BETA: RR 50 AM6 (1999-2002) - RR 50 ENDURO, MOTARD 50 ALU AM6 2003 - RR 50 SM AM6 (2002-2004)
MBK: X-LIMIT 50 Minarelli AM6 - X-POWER 50 Minarelli AM6
PEUGEOT: XPS 50 SM MINARELLI AM6 - XPS 50 T MINARELLI AM6 - XR6 50 MINARELLI AM6
Reference: 215.0428
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Reference: 2013801
A very high-end special for large carburations on MINARELLI AM6, DERBI ...
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 467798
A good quality pipe with a near perfect finish for an affordable price.
Reference: 467799
The unbeatable quality / price / practicality ratio for your am6 engines!
Reference: 1773
A quality 360 ° swivel pipe to replace the old one Supplied with two 30 and 45 ° sleeves!
Reference: 269801
A pipe that will gain in performance while spending little.
Reference: CT00746
A good quality pipe with an almost perfect finish for a more than affordable price!
Reference: 590
A pipe that will increase performance while spending little.
Reference: CL01
A competition model that will allow you to greatly improve the performance of your AM6.
Reference: 0211199B
21mm pipe for HONDA MB, MT, MTX 50 / MINARELLI AM6 50 ...
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 215.0462
For an improved admission and a good performance gain! Orientable 360° with tilt angle at 43° more pronounced than normal!
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.
Reference: 477414
Very good price / quality ratio, ideal to ask a rigid carburettor.
Reference: 215.0397
Pipe of admission Ø19mm, ideal for laying a rigid 21mm PHBG 17.5 has a motorcycle that requires a bent pipe as the Aprilia RX, MX 50 ...
For an improved admission and a good performance gain! Orientable 360° with tilt angle at 43° more pronounced than normal!
