Reference: 1213035B
Valve diffuser (venturi) of valve MALOSSI VL6 and VL15
An obligatory product for a perfect functioning of the gas supply.
Banner
The Malossi competition valve box allows the gas supply to be greatly promoted, especially on Peugeot 103 where the original intake is really not very good. It consists of an extra short rigid pipe, a large volume aluminum box to pass the large valves, and finally competition valves 4 slats karbonit 0.30mm VL7.
It will therefore allow you in combination with a crankcase preparation to have a good big admission without too much loss of pre - compression. This model is specific for the Peugeot 103 SPX, RCX, MVX and CLIP. You can mount it with original casings, BIDALOT, ATHENA, EUROCILINDRO, PARMAKIT, TNT, AXWIN... For carburetors over 19mm we recommend removing the slat stops. Nothing prevents you from mounting it with a flexible sleeve special rigid pipe and a flexible carburettor. This piece is really more elaborate than its competitor the POLINI.
These kits have been made to increase the power of the engines on which a sports transformation is applied for the competition. A cutting of the original engine support is mandatory to pass this box.
GUARANTEES : The components of the kit are guaranteed to be free from manufacturing defects.
Defective parts can be returned to us (free shipping) only if we give authorization.
The pack includes :
Pipe in 15 or 21mm
Complete gasket set
Lengthening aluminum box
Valves 4 blades karbonit 0.30mm VL7
Notice
Spare parts :
Pipe d.21mm/15mm
Seal bag
Valves vl7
Valve slats vl7
Select the valve box in 15 or 21mm before purchase.
-On the d.15mm you can mount the 14.15 and 16mm dellorto SHA model carburettors. Carburettor mounting diameter: 19mm pipe internal diameter: 15mm
-On the d.21mm you can put the 19,20,21 and 22mm dellorto PHBG model carburettors. Carburettor mounting diameter: 24mm pipe internal diameter: 19mm
Reference: 1213035B
An obligatory product for a perfect functioning of the gas supply.
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 002312
The only vulcanized valves on the market for PEUGEOT 103, with the added advantage of fiberglass slats!
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 507028
Ideal for gaining performance and solidity at the slightest hit.
Reference: 213.0017
Delivered with pipe and valve seal, carbon single-blade with refined stops ... The top for 103!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 635
With its steel slats clicking, original type, good quality!
Reference: 213.0032
Spare valves for POLINI casings with incorporated support of PEUGEOT 103 and MBK 51.
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: 365117
Valves mounted in mono-slat carbon 0.35mm for your 103!
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 27 5614.C0
A premium carbon blade set, ideal for optimal adjustment.
Reference: 215.0300
Enough to improve as it should the admission of your 103, ideal accompanied by a 15 or 16mm SHA carburetor!
Reference: 247766
Valves mounted in mono-lamelle fiberglass for your 103.