Reference: 213.0046
POLINI carbon evolution valves for horizontal minarelli (nitro, ovetto, aerox, jog, dinli ...)
Very high quality competition valves! Single-lamella, two-part diffuser, 2 sets of different lamellae!
Banner
Replacement valve slats, set of 4 pieces in thickness 0.30 and 0.35mm size 38 X 36mm, they are mounted on different valve boxes such as:
213.0040
213.0046 (NITRO, AEROX...)
213.0013 (MINICROSS or adaptation to 103, 51 POLINI casings)
215.0271 VESPA intake kit
215.0272 VESPA intake kit
215.0274 VESPA intake kit
144.405.003 (MINICROSS or adaptation to 103, 51 POLINI casings)
*0.35mm valves are more suited to very high revs than 0.30mm valves
Mounts on :
RACING valves for POLINI MBK 51 / PEUGEOT 103 crankcases Incorporated support (213.0013)
Reference: 213.0046
Very high quality competition valves! Single-lamella, two-part diffuser, 2 sets of different lamellae!
Reference: 215.0272
The best way to mount a big PWK carburetor on your PIAGGIO APE by gaining performance!
Reference: 215.0271
Valve inlet kit for increased performance, pipe fitting Ø 23mm.
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 27 5618.K0
High-end slats that will allow you to properly adjust your valve box.
Reference: 27 5034.K0
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Reference: 213.0036
High quality valves, delivered with 2 different thicknesses of carbon slats!
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 27 3021.C0
The famous LV2 carbon version for your AV10 engine MBK 51, MOTOBECANE!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 27 5610.K0
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: 213.0526
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 27 3021.K0
Competition valves, ideal for large or small configuration, for a gain in power and considerable recovery.
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 51303.12
Valves with fiberglass slats thickness 0.25mm, ideal for a motor origin until the small kit 70cc.