- -40%
Reference: 27 5034.K0
Valves 4 slats VL7 for MALOSSI valve box on Peugeot 103 and MBK 51
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Banner
The best to have the quality KARBONIT MALOSSI fiberglass at the correct price, and especially to choose the appropriate thickness for the maximum performance of its engine, is mounted on PIAGGIO CIAO with MALOSSI and PEUGEOT 103 or MBK 51 casings with complete valve box MALOSSI.
Here is a set of 4 high quality KARBONIT fiberglass slats, this set is mounted on the VL7 and VL8 valves. These slats are therefore mounted on MALOSSI valve box on Peugeot 103, MBK 51 but also on MALOSSI housings on PIAGGIO CIAO.
This game will allow you to adjust the thickness of your slats (0.30mm or 0.35mm) in order to better exploit your power range and therefore gain in performance. In case of sipe breakage or wear, this game is still an ideal faith.
Reference: 27 5034.K0
What to repair your complete MALOSSI valve box on PEUGEOT 103, MBK 51 ... By having in addition the KARBONIT or CARBON option.
Reference: 27 3021.C0
The famous LV2 carbon version for your AV10 engine MBK 51, MOTOBECANE!
Reference: 515384
G1 carbon competition valves with a thickness of 0.35mm for your MBK 51!
Reference: 51303.12
Valves with fiberglass slats thickness 0.25mm, ideal for a motor origin until the small kit 70cc.
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 247751
A well worked room for a considerable performance boost on your MBK.
Reference: 213.0526
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Reference: 215.0246
High-end 19mm diameter valve box POLINI for MBK 51.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 144.405.003
HYPER RACING valves with diffuser, bonded, single-leaf for POLINI 103, 51, MINICROSS POLINI, APE ...
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 27 5618.K0
High-end slats that will allow you to properly adjust your valve box.
Reference: 13800213
The intake pipe pack + valves G1 / G2 BIDALOT!
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 13700213
Competition valves for BIDALOT G1/G2 casings on MBK 51.