Reference: 2111744B
Stainless steel clamp for MALOSSI MHR silencer Ø70mm
MALOSSI Ø70mm stainless steel clamp for MALOSSI MHR silencer.
PEUGEOT 103
MBK 51
MOTOBECANE
PIAGGIO CIAO / VELOFAX
PEUGEOT FOX
HONDA CAMINO, PX, PXR...
DERBI VARIANT
SOLEX
PUCH
MINARELLI AM6
Low-pass exhaust pipe
High-pass exhaust pipe
DERBI Euro 3 / 4 / 5
DERBI Euro 1 & 2
MINARELLI P4 & P6
MINARELLI RV6, RV5, RV4, RV3
SUZUKI SMX, RMX, TSX
YAMAHA TY, RD, DT, MX
HONDA MB, MT, MTX, MBX, NSR R
YAMAHA CHAPPYBanner
Homologated on the road! Respect the legislation in force.
Here is available from us, the MALOSSI MHR GP REPLICA jar. This pot very little known on the market and yet it is very good material for a relatively low price.

After very severe tests in the Malossi test room, equipped with the most modern and sophisticated devices, the engineers of the research and development department were able to improve the performance of the various vehicles while remaining within the standards.

GP MHR REPLICA exhausts are intended for a sporty and demanding clientele, they personalize your vehicle thanks to their elegance and to a powerful "sound", thus completing the thermodinamic cycle of the famous MHR REPLICA Malossi thermal group! Everything here is planned to be at the top both aesthetically and at the engine level.

It also offers a nice sport noise despite its low resonance and internal clamping. But the important thing is that it is approved and will allow you to drive on the road without any problem in the eyes of the legislation of course if you leave the flange at the entrance of the pot. Its silencer is very pretty in aluminum from MALOSSI with a chrome bent silencer tip. All mounted on rubber / collar to avoid any harmful vibrations in its fixing and operation. In addition this pot is available for 199.90 € with us! For a pot as well studied, replacing the origin and well finished competition turns around around 220 euros.

Delivered 100% complete as presented with flange, silencer, screws, clamps, fixing system, homologation notice ...
Technical features :
EXHAUST in special sheet steel (thickness 1 mm); obtained by TIG and MIG robotic welding. Silent internal elements, anti-vibration aluminum support tab. Transparent varnish.
SILENCER in aluminum, Nitro blue anodized.
Only approved for :
APRILIA RS4 50 2T LC euro 2 (DERBI)
DERBI GPR R 50 2T LC euro 2 2012->
Mounts on :
-All DERBI euro 2 or 3 engine with perimeter frame
-DERBI SM (super biker)
-DERBI enduro (cross)
-DERBI DRD
-DERBI X-TREM
-DERBI X-RACE
-DERBI GPR
-APRILIA SX, RX ... DERBI engine
-APRILIA RS, RS4 ... DERBI engine
-GILERA SMT and others ...
And other models ...
Reference: 2111744B
MALOSSI Ø70mm stainless steel clamp for MALOSSI MHR silencer.
Reference: 1411745B
An already preformed wool for pot MALOSSI with the cartridge Ø70mm.
Reference: 0612631
Ideal in case of leakage or noise in your muffler and tailpipe.
Reference: VCR-RD15192/RE
A homologated and powerful exhaust for the original engines, 50cc competition and 70cc entry-level.
Reference: 15000989
Version 2019 90 to 96cc, BIDALOT RACING FACTORY exhaust for DERBI SENDA, SM, ENDURO, X-TREM, GPR...! Special mounting on BIDALOT RF 90/96 WR cylinders has 4 fixing screws!
Reference: 061685227
A good artisanal exhaust that will fit very well on 50cc racing kits or even small 70cc.
Reference: CARR11-02-GP
The RACING version of the TK GP! Tuned to machines with big 80cc kits!
Reference: 33036HF + 33661HF
Exhaust complete quality with muffler choices, model passage low, approved!
Reference: TFAST056
Low passage competitive exhaust for machines with motor DERBI EURO 2 and 3.
Reference: S6-96193951/BO
An excellent hyper racing exhaust pot designed for 90cc and 100cc
Reference: TFAST054
Low passage competitive exhaust for machines with motor DERBI EURO 2 and 3.
Reference: 3220038
Low-pass pot MALOSSI MHR SUPERMOTO 100, engine specific DERBI 100cc mounted
Reference: 3215230
One of the best approved jars on the market. It is made of 1mm thick steel sheets to avoid vibrations while keeping a very light weight.
Reference: H10083-GP
The approved version of the TK GP! Granted are machines with small kit 50cc or 70cc!
Reference: 487598
The famous GP8.0 pot from DOPPLER for all your DERBI X-TREM, X-RACE, DRD, GPR, APRILIA RS4 ...
Reference: 15000377
Version 2017 80 to 85cc, BIDALOT RACING FACTORY exhaust for DERBI SENDA, SM, ENDURO, X-TREM, GPR ...! Mounting on all cylinders: between axis fixing 48 to 50mm!
Reference: ESC-06P
A very well designed pot for the most torquey high engines. In addition it has a good finish and a very high build quality.
Reference: 200.0532
Low passage pot POLINI EVOLUTION for 50cc motorcycle with MINARELLI AM6 or DERBI engine.
Reference: EC08
A very good competition exhaust, ideal for large engine configurations!