Reference: 440924
ARTEIN flat reinforced joint sheets 2 layers (0.80 / 1.2mm)
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Banner
Here is a very good pack of the house ATHENA Racing, a kit of very high quality sheets for joints with its pipe joint joint very famous in the world of the motorcycle competition LOCTITE gray.
The pack consists of :
-1 sheet of 21x30 cm of cylinder head gasket and other Victor reinz type AFM22 1,20mm
-1 sheet of 21x30 cm of paper with cylinder head gasket and other Victor reinz type AFM22 1,00mm
-1 sheet of 21x30 cm paper seal (treated waterproof and smoothing, not recommended for cylinder head) CENTELLEN Hecker 3820 0,60mm
-1 sheet of 21x30 cm paper joint (not recommended for cylinder head) Flexoid 0.50mm
-1 sheet of 21x30 cm paper joint (not recommended for cylinder head) Flexoid 0.35mm
-1 sheet of 21x30 cm paper joint (not recommended for cylinder head) Flexoid 0,20mm
-1 tube of 80ml of gray LOCTITE with folder, cap and measuring cap. Resistance from -70 ° C to + 200 ° C.
Reference: 440924
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: 152122
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Reference: 2374
A low viscosity paste which will allow you a perfect sealing of your engine. This paw is often used by professionals.
Reference: SI 5660
A top-of-the-range joint compound for maximum strength and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 152110
Kit of four 150°C paper seal sheets, different thicknesses included.
Reference: 5910
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 440922
A very good quality product, ideal for cutting your own joint.
Reference: M813002000001
Paste with elastic joint and resistant to high temperatures. (300 ° C)
Reference: 036.164
Elastic joint paste resistant to high temperatures. (300 ° C)
Reference: 3463
A material addition paste used by our team for great preparation. The quality is present. Practicality too!
Reference: 5926
A high-end sealant for maximum resistance and sealing from -60° to + 250°.
Reference: 156190
A standard 0.50mm joint board + BA55 0.5mm cardboard joint
Reference: 1379570
Fast setting adhesive gel form, high resistance to adding material, filler metals / some plastics, rubber, wood, paper, leather ....
Reference: 3450
A very well studied paste for filling or repairing your steel parts.
Reference: 156189
Two standard joint boards in 0.25 and 0.50mm + BA55 0.3mm cardboard joint + steel reinforced joint in 1mm
Reference: 440923
ARTEIN self-cut seal sheets 0.15 0.25 and 0.50 mm.