Reference: H040890399
Aluminum cylinder head AIRSAL AIRSAL for kit 50cc cast iron DERBI euro 1 & 2
A yoke of very good quality which would ideal in case of breakage or wear on your head on your 50cc cast AIRSAL Origin kit.
Banner
Here is the spare cylinder head for the PARMAKIT aluminum 50cc kit on the DERBI euro 1 & 2 engine. This cylinder head has a high compression chamber with a polished finish with its aluminum cover.
Cast in a quality aluminum alloy, its aesthetics are also very nice with a perfect finish. Very good quality, ideal in case of breakage or wear / veiling... . Delivered as presented.
Mounts on the following motorcycles equipped with the PARMAKIT 50cc aluminum kit:
Euro1 and Euro2:
BULTACO Astro enduro 50cc
BULTACO Lobito supermoto 50cc
DERBI GPR 50 Nude before 2004 (EBS050)
DERBI GPR 50 Racing before 2004 (EBS050)
DERBI GPR 50R Replica year 2001 to 2004
DERBI GPR 50cc year 1998 to 2001
DERBI Senda 50cc before 2000 (tubular frame)
DERBI Senda 2000 50cc before 2004 (perimeter frame) Euro2
DERBI Senda DRD supermotard before 2000 (tubular frame)
DERBI Senda DRD supermotard before 2004 (perimeter frame) Euro 2
DERBI Senda Enduro before 2000 (tubular frame)
DERBI Senda R DRD Enduro before 2000 (tubular frame)
DERBI Senda R DRD Enduro before 2004 (perimeter frame) Euro2
DERBI Senda SM before 2000 (tubular frame)
DERBI Senda SM before 2004 (perimeter frame) Euro 2
DERBI Senda X-Race 2000 before 2004 (perimeter frame) Euro 2
DERBI Senda X-Race Trail before 2000 (tubular frame)
DERBI Senda X-Trem Enduro before 2000 (tubular frame)
DERBI Senda X-Trem Enduro before 2004 (perimeter frame) Euro 2
DERBI Senda X-Trem SM before 2000 (tubular frame)
DERBI Senda X-Trem SM before 2004 (perimeter frame) Euro 2
GILERA GP Replica 50cc
GILERA GSM 50cc
GILERA HAK Euduro 50cc
GILERA RC R Euduro 50cc (tubular frame)
GILERA SMT SM 50cc (tubular frame)
GILERA Sioux Enduro 50cc
GILERA Zulu Enduro 50cc
And many other models...
Reference: H040890399
A yoke of very good quality which would ideal in case of breakage or wear on your head on your 50cc cast AIRSAL Origin kit.
Reference: CU.12.50
Breech upscale part for kit 50cc ITALKIT!
Reference: CU.12.51.5
Ideal in case of breakage or wear, high quality cylinder head stud, model ITALKIT Competition for kit 50cc on DERBI.
Reference: 322882
A very good cylinder head high compression for high engines DOPPLER, ORIGIN .... In 50cc Ø40mm!
Reference: 23150.04
Cylinder head of replacement for kits 50cc PARMAKIT cast iron DERBI euro 1 and 2.
Reference: CU.12.51.1
Ideal in case of breakage or sheer for a refurbishment of your high engine DERBI euro 1 and 2.
Reference: FU.029.0595/GT
Stud bolt (decomposable two parts) complete replacement with single piston end segment, special for the high engine 50cc DERBI GT FURYTECH RS10.
Reference: S410105308002
Plot high quality aluminum, ideal to replace your worn or broken part on kit 50cc ATHENA Alu for DERBI EURO 1 and 2.
Reference: CU.12.85
The replacement stud cylinder head for the 80cc ITALKIT aluminum kits DERBI euro 1, 2, 3 & 4.
Reference: CU.12.51
Stud bolt (decomposable two parts) complete replacement, special for the top 50cc DERBI.
Reference: CUL-738
The replacement head for kits cast BARIKIT Racing 39,90mm diameter model with 2 points of additional hardware.
Reference: 038701A
The famous cylinder head, high compression model CARENZI blue for your engines DERBI euro 1 and 2.
Reference: TS00181
Spare cylinder head high compression, black model to 40mm kit Derbi mécaboite euro 1 & 2.
Reference: CUL-740
The replacement head for cast kits BARIKIT Sport 39,90mm in diameter, mounted model with an entourage of O-ring.
Reference: 040832399
Breech very good with room for incoming kit 50cc aluminum AIRSAL two segments!