Much more than a simple crutch or a standard motorcycle lift, here is a mechanical screw lift from P2R !
Able to support a load of up to 500 Kg, in other words, you can lift any small or large displacement.
You will be able to fix this tool to the ground thanks to the 2 plates on each side of the bridge, in order to optimize the ground clearance of your motorcycle when lifting it and above all additional safety during your mechanical sessions.
Its minimum height is 90mm (bridge lowered to the max.) and its maximum height is 405mm (reaching 500mm with supports). The lifting platform is flat and long enough to provide you with multiple uses.
This platform is equipped with two removable guides in order to be able to put machines with swing arm on it without any problems. Its guides are themselves equipped with locking screws to guarantee even more safety when lifting and maintaining the machine.
Lifting is therefore done manually using an axis and a pipe wrench (same principle as a bench vice for use, just turn in one direction to raise and the opposite to lower) . Delivered 100% complete as presented. As you will have understood, this quality tool is robust and ultra practical in a garage thanks to its wide variety of settings in terms of both width and height, as well as the weight supported...
Features :
- Table adjustable in height to reach 500 mm with supports.
- Fixed platform 15x 45 cm.
- 2 sliding supports provided
.png)
.png)
