Reference: D525.30
FRANCE EQUIPEMENT 525 sprocket to be machined in aluminum for moped, motorcycle, ...
Crown to be machined, in aluminium, available from 30 to 60 teeth! For 525 chain.
Price
€32.49
Out-of-Stock
Out-of-Stock
- There are no more items in your cart
- Shipping Free
- Total €0.00
-
Banner
Crown 50 or 53 teeth in aluminium/steel CONTI for BETA FACTORY, RR... 50cc 2T from 2005
513618
CONTI reinforced crown for BETA FACTORY, RR... 50cc 2T motorcycles from 2005.
Description
Here is the aluminum and steel crown from CONTI. Of very good quality, it allows a very low weight, but also a resistance over time, unlike full aluminum or full steel crowns!
This sprocket will be ideal to start again on excellent transmission / chain / sprocket bases! Intended to be mounted on BETA motorcycles.
Width 428, available 53 or 50 teeth. To optimize your transmission, we advise you to change the chain as well as the sprocket. Only available in this color.
Mounts on BETA FACTORY, RR... 50cc 2T from 2005.
Product Details
513618
20 Items
New product
Specific References
- ean13
- 3663829160651
16 other products in the same category:
Reference: 500930
Crown 53 teeth in 420 DOPPLER for BETA FACTORY, RR ... 50cc 2T from 2005 color NEOCHROME
DOPLLER reinforced crown in 420 with a superb color for BETA FACTORY, RR ... 50cc 2T motorcycles from 2005.
Price
€49.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: D520.31
FRANCE EQUIPEMENT 520 sprocket to be machined in aluminum for moped, motorcycle, ...
Crown to be machined, in aluminium, available from 30 to 60 teeth! For 520 chain.
Price
€27.49
Out-of-Stock
Out-of-Stock
Reference: D428.30
FRANCE EQUIPEMENT 428 sprocket to be machined in aluminum for moped, motorcycle, ...
Crown to be machined, in aluminium, available from 29 to 78 teeth! For 428 chain.
Price
€24.99
Out-of-Stock
Out-of-Stock
Reference: 485201
Crown 53 teeth in 420 for DERBI SENDA DRD, SM, DRD RACING, EVO, NUDE GPR, RACING, APRILIA RS4, SX ...
Crown of very good quality, identical to the origin but with a much lower price. Available in 53 teeth only, 6 fixing points, Ø108mm.
Price
€20.83
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 264760
Crown 48 teeth in 420 for RIEJU RR, SPIKE, SMX, RMX, ... 50cc
A crown of very good quality, identical to the origin but much less expensive.
Price
€21.66
Requires a delay of more than 20 days!
Requires a delay of more than 20 days!
Reference: 3985.1018.50
Crown 50 or 52 teeth 420 for Derbi GPR 50 from 1997 to 2003
Crown high quality for old Derbi GPR 50.
Price
€49.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 509881
copy of Crown 53 teeth in 420 DOPPLER for RIEJU MRT, RS3, DERBI SENDA, PEUGEOT XP6 2000, MBK X-LIMIT 2003, XP7 ... in aluminum
DOPPLER reinforced crown in 420 in ultra light aluminum for RIEJU MRT, RS3, DERBI SENDA, PEUGEOT XP6 2000, MBK X-LIMIT 2003, XP7 ...
Price
€40.83
Attention, may require a delay of more than 20 days!
Attention, may require a delay of more than 20 days!
Reference: 41100-53
Crown 53 teeth in 420 AFAM for DERBI SENDA/ GILERA RC R/ BULTACO LOBITO
53-tooth steel sprocket from AFAM at a very good price/quality ratio to replace the worn or damaged original one!
Price
€23.33
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 3000.30
Crown 30 to 52 teeth in 420 FRANCE EQUIPMENT for YAMAHA CHAPPY, DT, DT MX, DT M, RD, ... 50cc from 1978 to 1995
Very good quality, ideal for adjusting the transmission of your 50cc gearbox as well as possible.Centering Ø 44mm, diameter of the screw anchors 60mm.
Price
€24.16
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 484142
Crown 48 or 52 teeth in 420 for PEUGEOT XR7, NK7, XP7, SM, XPS 2005 to 2008, MALAGUTI XSM and RIEJU RRX SPIKE, SMX ...
Crown of very good quality, identical to the original but with a much lower price. Available in 48 or 52 teeth, 5 fixing points, Ø62mm.
Price
€19.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 0404.5003.30
Crown 30 to 54 teeth in 420 FRANCE EQUIPMENT for HONDA MTX, MTX R, MBX, MT S, CR, ...
Very good quality, ideal to better adjust the transmission of your bike 50cc or 80cc ... .
Price
€24.16
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 500923
copy of Crown 53 teeth in 420 DOPPLER for RIEJU MRT, RS3, DERBI SENDA, PEUGEOT XP6 2000, MBK X-LIMIT 2003, XP7 ... in aluminum
DOPPLER reinforced crown in 420 in ultra light aluminum for RIEJU MRT, RS3, DERBI SENDA, PEUGEOT XP6 2000, MBK X-LIMIT 2003, XP7 ...
Price
€49.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 3410.1753.50
Crown 50 to 60 teeth with the choices in 420 for BETA RR SM from 2005 to 2011 and TRACK from 2008 to 2015
Very good quality, ideal for a refurbishment on your motorcycle 50 with gearbox.
Price
€24.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 484143
Crown 48 or 52 teeth 420 for DERBI SENDA DRD PRO, RACING, EVO, BLACK DEVIL ...
Crown of very good quality, identical to the origin but with a much lower price. Available in 48 or 52 teeth, 6 fixing points, Ø102mm.
Price
€19.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 0303.0255.35
Crown 35 or 40 teeth 420 for HONDA MONKEY 50 from 1978 to 1993
Very good quality, ideal for refurbishment MONKEY on your bike.
Price
€41.66
Custom crown, shipping in 5 to 12 days!
Custom crown, shipping in 5 to 12 days!
CONTI reinforced crown for BETA FACTORY, RR... 50cc 2T motorcycles from 2005.