Reference: 478942
Set of 2 reinforced bearings (C4 polyamide cage) + DOPPLER crankshaft spy viton seals for derbi euro engine 1, 2, 3 & 4
Strong and very good quality bearing at an affordable price.
Banner
This is one of the best value / price! The crankshaft DOPPLER ER1 is a reinforced model, balanced and in full masses, it is really intended for the reinforcement of driving bottom and the performance. The steels used are more upscale, they are treated well and hardened, balancing is dynamic and really neat!
When talking about finishing at DOPPLER, it does not skimp! The finish is really perfect for such a price. The link is placed on a reinforced crank pin and a much increased cage with anti-friction wedges. Aluminum caps are obviously cover the balance holes. For more pre compression, the masses are extremely full. The lubrication are obviously reviewed and corrected too. The rod is a premium model well drawn, cast manufacturing process.
In short, this crankshaft will resist to most equipped engines, it offers excellent performance and resistance to scratch. For engines intended are larger and more powerful regimes still be preferred to use the admittedly more expensive but ENDURANCE model designed to support larger engine configuration!
The rod size, running, the diameter of the bristles are preserved as the original. This model is specific to mécaboite DERBI GPR, driving DERBI euro 1 & 2 with balance shaft / balancer.
Features:
Masses: full
-Soies (Worn bearings) in diameter Ø20mm origin
-Bielle Reinforced size origin 90mm
-Cage Original size Ø12X15X17,5mm
-Course Origin 40.00mm
-Clavetage: Yes
-Comes With its needle cage
Reference: 478942
Strong and very good quality bearing at an affordable price.
Reference: 459124
A cage available in 2 sets of adjustment! Diameter Ø12 X 16 X 15mm for many applications.
Reference: 441282
The best value for money on the market, an unbeatable quality / performance / price ratio! In addition to this, you need to know more about it.
Reference: IM07040
A very good crankshaft, reinforced model that withstand today an original type of configuration to small 70cc.
Reference: 518458
Set cast iron kit 50 + reinforced crankshaft in full masses for DERBI EURO 2 (until 2006).
Reference: CIG-131R
The must of BARIKIT crankshaft. It is perfectly balanced, it is mounted on a reinforced connecting rod which also rests on an increased crankpin.
Reference: 263990
One of the best value for money on the market. It is very well balanced in full mass of course reinforced to support the largest configurations.
Reference: CIG-19
A cheap high quality crankshaft which will support large and small 50cc 70cc. Ideal in case of breakage or wear your old crankshaft.
Reference: 12100054
The famous crankshaft BIDALOT RACING REPLICA for motor bike 50cc DERBI, unbeatable quality has unbeatable prices.
Reference: CIG-52
Crankshaft original type for old engines DERBI air cooling.
Reference: 081015
The highest range model in ATHENA for bike 50cc DERBI euro 1 or 2, named hyper racing.
Reference: 31083750
A good reinforced crankshaft that mounts to virtually any configuration for an unbeatable price.
Reference: 435
The most performance crankshaft from ARTEK which can go up to 18,000 revolutions!
Reference: VI02
An upscale crankshaft that will support the highest engine configurations.
Reference: 629.0012/GT
The famous crankshaft FURYTECH for motorcycle DERBI engine euro 1 and 2.
Reference: CB.12.7
A cheap crankshaft that will adapt very well for small 70cc kits. A very good entry level from ITALKIT.
Reference: 090705A
A better than originally crankshaft that will support very many good 50cc kit and even small 70cc!
Reference: 5312590
The best original racing crankshafts for GPR.