Banner
POLINI hose with internal diameter of 18mm therefore ideal for ends from 17 to 20mm.
Here is a hose normally reserved to connect the cylinder heads to the radiator on the XP65R competition of POLINI phase 1. It will be practical for your personal assemblies, it has a 90 ° angle! Its internal diameter is 18mm, so ideal for bits from 17 to 20mm! Very flexible and withstands very high pressures.
Length of the short part 73mm
Length of the long part 215mm
Internal Ø 18mm by external Ø 23.5mm
Reference: 519895
Aluminum cooling radiator for MBK MACH G, YAMAHA JOG R or adaptation to other models. It is of course identical to the original, of as good quality but much cheaper.
Reference: 501200
An excellent top-of-the-range refrigerant and anti-corrosion coolant withstands down to -40 ° C.
Reference: 171806
Cooling hose internal diameter 12mm sold by 1m.
Reference: 483419
A one meter hose that can be used for many applications, reinforced model 3mm thick.
Reference: 476549
An excellent top-of-the-range refrigerant and anti-corrosion coolant withstands down to -38 ° C.
Reference: 11027
Good quality necklace that can tighten your strongest clamping without risk of breakage.
Reference: 094000
With its 92mm long, this heatsink is one of the most efficient, very well finished, they are only available in polished aluminum color. In addition to this, you need to know more about it.
Reference: 2262
Transparent cooling hose inside diameter 12mm sold by 1.50m.
Reference: 107798 / 112652
Competition liquid, offers cooling down to -15 ° compared to a traditional liquid!
Reference: 143.220.010
POLINI universal radiator 22X14X17 cm veiled, the largest on the surface of the small POLINI veiled! Used in competition in GP5. This proves the quality and the perfection of this radiator.
Reference: 483094
A good quality collar that allows you to tighten your clamps more tightly without risk of breakage.
Reference: 21 0870B
A high-end necklace that allows to squeeze harder without risk of breakage.
Reference: 21 0866
A high-end collar that can tighten your tightening stronger without risk of breakage.
Reference: 093600D
Original aluminum cooling radiator for DERBI Senda or adaptable to other models and prototypes.
Reference: 144.220.001
POLINI cooling radiator 72x27cm with universal integrated vase. The most specific radiator from POLINI.
Reference: 11031
A high-end necklace that can tighten your strongest clamping without risk of breakage.
POLINI hose with internal diameter of 18mm therefore ideal for ends from 17 to 20mm.
