Reference: 11021740 - 11020940 - 11024640
Segment Ø40 X 1mm for kit 50cc AIRSAL T3 liquid on Peugeot 103
Ideal in case of wear, loss of compression ... On your AIRSAL 50cc liquid cooling kit on PEUGEOT 103.
Banner
Here is the complete kit from liquid AIRSAL Peugeot 103, this little 50cc model is really a good high engine for a completely reduced price! In a report originally here the parameters that have been improved, first of the diagrams were improved, following the combustion chamber st a hemispherical high compression polished model, and finally, the piston is a single segment end (1mm thickness) to allow high speeds.
The finish is very good on this model, as the cylinder is originally a 3 ports has oval exhaust. It is aluminum nykasil Treaty. The piston is an average range mono-segment, a little preparation is done on the rear skirt in order to improve the scanning. It has a 1mm thick end segment of non standard chrome range / no bulging / not pre-rehearsed.
The kit comes complete with pack attached. So he shall bring a good improvement without loss of torque and power for this unbeatable price.
We recommend this kit with: carburation 15mm with 0.30mm slide valves, exhaust of relaxation, drive change made to fully exploit the highest power regime that originally original form of cylinder base gasket for not delivered with the kit, B9HS candle.
The pack contains:
2 piston clips
Piston Pin
Piston mono-segment
D.40mm X 1mm segment
3 aluminum cylinder transfers oval exhaust
Cylinder head high compression
notice
Pack complete joint except cylinder base gasket !!
Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: 11021740 - 11020940 - 11024640
Ideal in case of wear, loss of compression ... On your AIRSAL 50cc liquid cooling kit on PEUGEOT 103.
Reference: 14021740
Ideal for refurbishing of your high engine kit 50cc Peugeot 103 with!
Reference: 06021740
Ideal in case of wear, primer .... The 40mm AIRSAL piston for 50cc kit on PEUGEOT 103!
Reference: 04021740
A high compression cylinder head without decompressor for the 50cc aluminum AIRSAL kit in Ø40mm. Ideal in case of breakage, crack or just hot ...
Reference: 02021740
Ideal in case of tightening to start on a new engine less and a little more efficient.
Reference: 02020940
A fairly effective kit in single-segment, more efficient than the AIRSAL T3 or ORIGINS.
Reference: 160206
High original type cast iron engine, correct quality for a low price!
Reference: 032100
A kit almost identical to the original but at half price. A way to restart your 103 without spending too much.
Reference: CIL-986-S
An AIRSAL T3 base reviewed by BARIKIT for your PEUGEOT 103!
Reference: 31 5098
The best 50cc liquid 103 with the Polini. Exhaust bar and a bi-segment!
Reference: CI.26.490.G
One of the most powerful kits, a truly special character! A must for your 103!
Reference: 18724
A more powerful kit than the original affordable with a quality and finish well present.
Reference: HM37
Top G2 MVT competition engine.
Reference: 142.0087/ST
Kit G1 replica powerful shot competition, exhaust W, 6 transfers, mono-segment ... Out of production!
Reference: 064400
A very powerful and very solid kit! Very high quality.
Reference: 142.0104
The best 50cc liquid 103 with the MALOSSI. Exhaust W and mono-segment!
Reference: 56202.00
A high-performance engine and high quality!
Reference: 502218
A super complete liquid kit, solid and efficient for your 103 liquid cooling!
Reference: 665
Original type cylinder a little improved!
Reference: 31 6757
Out of production, producer, unavailable.
Reference: 811
High original type engine in aluminum for PEUGEOT 103.