Banner
A high-performance engine and high quality!
The kit 50cc in diameter 40mm PARMAKIT Peugeot 103. With its quality aluminum cylinder and very well worked finish, it will provide good performance while respecting the authorized cubic capacity of 50cc. 
Its cylinder has a special coating nikasil, aluminum. With 3 transfers and a standard oval exhaust, its canals and architecture are very good. A high engine 100% Made in Italy. 
The piston is a specific type of bi-origin model segments strengthened. The segments are standard and will above all a lot of torque and strength. Their thickness is 1.5mm, with an axis of Ø12mm piston 33mm and clips G. 
You can post an original cylinder head or racing in 40mm with decompression. We regret the absence of replacement seals and wear side to its piston. Clearly, one of the best price / quality / market performance for 103. The best reconaitrons EUROCILINDRO the cylinder become very rare!
We recommend this kit with at least: a 15mm carburetor, racing exhaust, ignition unbridled, lightweight inverter for good decision-towers.
The pack contains:
Master cylinder aluminum nykasil 3 transfers
-piston Bi-segment
X2 Segments standard 1.5mm thickness
Axis-piston Ø12mm X 33mm
-Clips G
-pack seal
-Notice
-Autocollant 
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: 56140.02
Ideal in case of loss of compression to maintain your d.40mm 50cc kit.
Reference: 56202.16
If compression loss and maintaining your kit 50 PARMAKIT.
Reference: 142.0104
The best 50cc liquid 103 with the MALOSSI. Exhaust W and mono-segment!
Reference: 160206
High original type cast iron engine, correct quality for a low price!
Reference: 811
High original type engine in aluminum for PEUGEOT 103.
Reference: 02020940
A fairly effective kit in single-segment, more efficient than the AIRSAL T3 or ORIGINS.
Reference: 032100
A kit almost identical to the original but at half price. A way to restart your 103 without spending too much.
Reference: 18724
A more powerful kit than the original affordable with a quality and finish well present.
Reference: HM40
Top competition engine G3 MVT .
Reference: 01021740
A great full kit liquid, solid, high-performance liquid cooling for your 103!
Reference: 142.0087/ST
Kit G1 replica powerful shot competition, exhaust W, 6 transfers, mono-segment ... Out of production!
Reference: 02020640
A kit that makes an excellent compromise between torque, power and life. A price always challenging all competitions.
Reference: 31 5098
The best 50cc liquid 103 with the Polini. Exhaust bar and a bi-segment!
Reference: 665
Original type cylinder a little improved!
Reference: 02024640
Improved diagram that will give slight power gains compared to the origin.
Reference: 56205.00
Rare, super powerful, very complete ... A must for high 50cc air engine for PEUGEOT 103.
Reference: 02021740
Ideal in case of tightening to start on a new engine less and a little more efficient.
Reference: 475809
High genuine PEUGEOT engine in cast iron, excellent quality.
A high-performance engine and high quality!
