Completed the problems of slipping over the big powers!!!!
Excellent quality, under the brand name TOP PERFORMANCES. This Racing clutch kit includes all the accessories presented, i.e. nuts, reinforced springs, reinforced discs with interlayers (smooth discs) and red pressure flask.
Use of a garnished disc, steel disc and an additional spring compared to the original.
Thanks to the use of 5 springs , we obtain a better distribution of the pressure. The pressure flask and pusher are made of aluminium alloy with a specific heat treatment to optimize cooling during frictions and avoid the risk of heating therefore a better dissipation of heat.
The pressure flask is anodized in red colour, its thickness is 40 microns and the hardness of the surface is higher a 500 HV, the surface of the friction material was also increased by 25%.
In other words, with all these developments, we aim for performance and longevity on this Racing clutch kit from TOP PERFROMANCES!
A real concentration of technology, competition parts that do not require any modification when mounting on your Minarelli AM6 engine mecaboite because they install without any problem instead of the original parts.
Gets on:
Any MINARELLI AM6 engine ...
As a reminder:
- The oil used must be of the special 10W30 for gearbox with oil bath clutch, it must be between 0.75 and 0.85L.
- The gearbox discharge screw of the minarelli am6 engine tightens to 1.8mdaN torque
- Transmission cover screws tighten with 1.1 mdaN torque
- The counter nut of the presser tray with a torque of 2.7 mdaN
- The 4 screws of the pressure tray (clutch springs) with a torque of 0.5 mdaN
- The clutch nut with the folding puck and the crankshaft nut that keeps the 2 pinions at a torque of 7.5 mdaN.
.png)
.png)
