Rapid Bike Easy ECU box for Honda SH, CBF, CB R ... 125, 150, 600 ...

The Rapid Bike EASY additional housing is equipped with a microprocessor to act directly on the signal of the lambda probe and optimize the air-to-petrol ratio, improve engine efficiency and remove torque power holes, especially at low and medium speeds.

Connect your EASY housing to the original Lambda sensor connectors and check its smooth operation with the state led. All you have to do is calibrate the case: it is a very simple operation (thanks to two easily accessible potentiometers) for which it is not necessary to use additional software.

The EASY housing, able to handle up to two lambda probes, is particularly suitable for vehicles used in their configuration'origine.Contrremove power and reduce consumption!

The graph shows that Rapid Bike EASY (in red) allows for a higher speed at equal aperture of the accelerator (original version in blue), by placing the value of the lambda probe in the optimal range between 13.5 and 14.5 AFR

Gets on:

HONDA:

HS 125 from 2007 to 2012
CBF ABS 1000 from 2010 to 2013
CBF N 600 2008-2010
CBF S 600 2008-2010
FES PANTHEON 4T 125 from 2003 to 2006
FES PANTHEON 4T 150 from 2003 to 2006
FJS SILVER WING T SW-T 400 from 2009 to 2016
FJS SILVER Wing T SW-T 600 from 2011 to 2016
NT V DEAUVILLE 700 from 2008 to 2013
PES PS I 125 from 2007 to 2012
HS 150 from 2007 to 2012
CB R 1000 from 2008 to 2015
CB R ABS 1000 from 2008 to 2017
FES S WING 125 from 2007 to 2012
FES S Wing 150 from 2007 to 2012
NPS ZOOMER 50 from 2005 to 2012
NSA DN-01 700 from 2008 to 2009
PES PS I 150 from 2007 to 2012
CBF FT ABS 1000 from 2010 to 2012