For MVT Premium PREM 19 ignition (scooter with minarelli engine from 2003) and PREM 21 (minarelli am6 on YAMAHA / MBK machine from 2003) or MVT DIGITAL DIRECT DD 19 and DD 21 ignition.
Here is a very practical little box, it was invented a few years ago by Mr. Alain GAUDOU (former boss of AGP and now boss of MVT ignition). This box will allow you many wonders :
1-This box improves and increases the variation (more variable curve).
2-This box will offer you the choice between 3 different ignition curves.
3-This box will allow you to adjust the advance and this without disassembly.
Clearly, this unit will increase the variation of the ignition, the number of degrees of offset according to the revolutions minutes, the ignition will obviously be much more efficient. Consequently, an ignition curve represents the variation according to the number of revolutions per minute. For example, a torquey engine will at best require a fairly low and torquey curve while a very powerful engine at high speed will require a very pronounced curve. Here you can select the desired curve, 3 curves are available to you, to modify & select it, you just need to enter a combination of numbers (instructions and combinations of numbers supplied with the part). Finally, once the curve has been selected, you can modify the ignition advance (the famous ignition timing). No need for a setting rod and tool to modify. Only a combination of numbers! For example, here is the list of combinations and their actions on ignition:
Start by setting your MVT Premium or Digital Direct ignition to 1.5mm before top dead center (TDC). Take care to check your carburetion on each test!
Code 000000 = MVT curve 1 and + 3 ° in advance
Code 100000 = MVT curve 1 and + 2 ° in advance
Code 110000 = MVT curve 1 and + 1 ° in advance
Code 111000 = MVT curve 1 and + 0 ° advance (advance like MVT Premium or Digital Direct originally)
Code 111100 = MVT curve 1 and -1 ° in advance
Code 011100 = MVT curve 1 and -2 ° in advance
Code 001100 = MVT curve 3 and + 3 ° in advance
Code 000100 = MVT curve 3 and + 2 ° in advance
Code 001000 = MVT curve 3 and + 1 ° in advance
Code 010000 = MVT 3 curve and + 0 ° advance (advance like MVT Premium or Digital Direct originally)
Code 011000 = MVT 3 curve and -1 ° advance
Code 010100 = MVT curve 3 and -2 ° in advance
Code 110100 = MVT curve 4 and + 3 ° ahead
Code 111110 = MVT curve 4 and + 2 ° in advance
Code 110110 = MVT curve 4 and + 1 ° in advance
Code 010010 = MVT curve 4 and + 0 ° advance (advance like MVT Premium or Digital Direct originally)
Code 110010 = MVT curve 4 and -1 ° advance
Code 100010 = MVT curve 4 and -2 ° in advance
Once you have selected the correct advance curve for your engine, be sure to recheck your carburetor! This small box will bring even more performance to your engine, if you are well tuned, the gain is impressive.
.png)
.png)
