Reference: 172.0016
TORSEN WD swingarm reinforcement by POLINI Motori MINARELLI / YAMAHA Horizontal motor (nitro, aerox, ovetto, neos, ...) 6mm
A piece not to neglect especially on a pushed engine! Version 6mm.
Banner
Dirt entering your crankcase on the ignition side because you removed your oil pump? Nothing could be easier then to solve this problem thanks to the FURYTECH oil pump shutter. This cover will therefore allow you to replace your pump and keep a clean engine. It attaches to exactly the same location as the pump. In addition it is joined by an O-ring which will allow a perfect seal of your engine.
Reference: 172.0016
A piece not to neglect especially on a pushed engine! Version 6mm.
Reference: 289068A
Essential aesthetic element for your scooter during runs, meetings ...!
Reference: 2515482
MALOSSI MHR racing transmission housing, ideal to accompany a thrust engine configuration.
Reference: 029.5110
Ideal in case of breakage or crack your case for a good alternative and much cheaper than the original.
Reference: 3VLE54210000
Original YAMAHA transmission casing for your MINARELLI Vertical / Horizontal scooter scooter (booster rocket, bw's, nitro, aerox, ovetto).
Reference: 489446
Ideal to have a clean and waterproof motor even when removing the oil pump!
Reference: 289067
Quality part to improve the aesthetics of your horizontal minarelli scooter!
Reference: 171123
A good quality pieces of kit that will give style to your scooter.
Reference: 451084
Ideal for the refurbishment of your engine casings.
Reference: 170.0301
POLINI EVOLUTION black model racing transmission housing, ideal to accompany a push engine configuration.
Reference: 14372
Ideal for the refurbishment of your motor housings.
Reference: 155861
An ignition housing with complete pump to refurbish its liquid horizontal minarelli (nitro, aerox, sr ...)
Reference: PI130491
Ideal for refurbishing your gear/transmission part on PIAGGIO housing.
Reference: 164577
A must have item for those who keep their lubrication separate with the engine oil tank for automatic mixing.
Reference: 285.0135
Ideal for the refurbishment of your part gear / transmission on casing MINARELLI & PIAGGIO.
Reference: 70350000
Replacement bearing for flywheel side secondary shaft on your scooters!