Banner
Ideal to accompany a crankshaft with large bristles (bearing bearings) in Ø20mm diameter on a prepared configuration! Set of reinforced bearings C3 sizes + spy glass joints.
Here is the set of 2 bearings + 2 spi (spy) joints of crankshaft for mécaboite minarelli am6, marketed by BARIKIT under the brand SNR, this set has been specially selected to agree perfectly on a configuration prepared with crankshaft in large bristles. This pack therefore consists of 2 C3 model bearings of increased size (therefore for large silks, bearing bearings different from the origin) with riveted steel cage, Ø20mm X Ø47mm X 14mm thick and a set of 2 spy seals Viton racing specials for high speed. 
C3 bearings in addition to being specific Ø20mm, will allow optimal resistance of your low engine, additional reinforcement, a released engine brake allowing more fluid revs, reduced vibrations ... and consequently, guaranteed performance! As a reminder, the original crankshafts are in small bristles (Ø17mm), the crankshafts in large bristles Ø20mm diameter are like the BARIKIT BRK Competition, the BIDALOT Racing pro, some TOP PERFORMANCES TPR which have 2 large bristles and many other models ....
Characteristics:
-X2 bearings C3 diameter Ø20mm X 47mm X thickness 14mm
-X1 joint spy 24X35X7mm
-X1 joint spy 17X35X7mm
Reference: 479448
Solid bearings with good quality spy seals, ideal for small and medium configurations.
Reference: 488031
Ideal for reassembling your crankshaft while solidifying it to the maximum. This pack will be perfect on 50cc and 70cc kits Very good quality!
Reference: 80000400
Reinforced high-end bearing SKF by BIDALOT. Model 6204 size Ø20 X 47 X 14 mm.
Reference: P4E0010444001
A complete pack of high quality, ideal to accompany and strengthen a crankshaft with bristles (bearing bearings) size Ø17mm! C3 models with viton spy joints.
Reference: 4484
Ideal for a quality refurbishment on your low minarelli am6 engine.
Reference: 488824
A high-end pack, ideal to accompany a well-prepared engine configuration with large bristle crankshaft (bearing seats) Ø20mm!
Reference: K070090
Indispensable for the refurbishment of your low am6 engine.
Reference: 100872
Ideal to reinforce your low engine of minarelli with quality material.
Reference: 7961
Ideal to reinforce your low engine of minarelli with quality material.
Reference: P4E0010444002
A complete pack of high quality, ideal to accompany and strengthen a crankshaft with bristles (bearing seats) of original size Ø17mm! C4 models with Viton spy joints.
Reference: P400010450003
Kit of seals spy competition, reinforced and specific high speed!
Reference: 9924750
Pack of high quality TOP PERFORMANCES RACING reinforced bearings with oil seals for minarelli am6 engine.
Reference: 6204 TB.P63
A bearing that will support all your most advanced configurations. Real competition piece!
Reference: 285.0003
High quality oil seal for MINARELLI AM6 engine
Reference: 520845
Ideal for reinforcing your minarelli am6 low competition engine with quality material.
Reference: 515588
Ideal to strengthen your low engine minarelli am6 with quality material.
Ideal to accompany a crankshaft with large bristles (bearing bearings) in Ø20mm diameter on a prepared configuration! Set of reinforced bearings C3 sizes + spy glass joints.
