Banner
A filter with a large reserve of air, special large PWK carburetor, PHBH, PHBL, POLINI CP with tulip ... and other models. Ideal for a motor prepared competition!
A filter specially designed and studied to accompany a PWK carburetor, type PWK, OKO, PHBH, PHBL, POLINI CP with intake tulip ... and other large carburetors. The POLINI BIG EVOLUTION air filter is one of the best competition filters thanks to its large air reserve and filtration quality. In addition, the materials used are of great qualities.
It is entirely foam and conical. Reinforced and solid, it will offer you an optimal filtration so that your engine breathes at all times a pure air! You will have understood it, it is a real element of performances destined for the competition Made In Italy. Its carburetor mounting diameter is Ø60mm, conical shape, its total length is 110mm and its width 145mm.
Advice before assembly:
This is a special sponge air filter. Before use, moisten them with a light veil of filter oil and check the carburation setting.
You will find by clicking here the oils and cleaners for air filter, cornet.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 10001-82
A tulip which increases the venturi effect and therefore the efficiency of your engine.
Reference: 343.0026
Ideal to fit your Ø60 or 62mm air filter on your POLINI CP carburettor.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 343.0025
Ideal for adapting your Ø60mm air filter on your POLINI CP carburetor.
Reference: 343.0028
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Reference: 343.0035
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Reference: 343.0035
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Reference: S410000200010
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 485252
A 200 X 300mm foam board, ideal for cutting, as you wish, the shape of your original air filter.
Reference: 114010T
MARCHALD FILTERS foam air filter for HONDA and HM 50cc or 125cc motorcycles up to 2014
Reference: S410000200004
A very high quality air filter that will filter all impurities without disturbing the engine performance.
Reference: 440956
An air filter with a worked design with very good performance.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 260269
TUN 'R air filter for SHA carburetor, it allows better filtration and better performance.
Reference: 460013
Air filter with a unique look, small size.
Reference: 203.0036
3 diameters and 2 lengths to choose from for a high quality filter with a design reflecting the quality! Breathing and design at the top!
Reference: 203.0011
A high-end air filter specially designed for the PEUGEOT 103 mvl, mv, lm and many more! To accompany a POLINI CP carburetor.
Reference: 203.0066
Ideal for positioning your filter at 90 °, a high-end filter for optimal protection of your engine against external impurities.
Reference: 484132
Air filter foam teknix to cut, size 30X21cm.
Reference: 115050A
K & N green horn type air filter, angled at 45 ° but adjustable at half the elbow! A very good filter that breathes well.
Reference: 203.0147
An air filter with a large reserve of air for optimal breathing of your engine!
Reference: 1381
TUN 'R air filter for carburettor, ideal for offering more performance to your engine equipped with a 15 or 16mm SHA!
A filter with a large reserve of air, special large PWK carburetor, PHBH, PHBL, POLINI CP with tulip ... and other models. Ideal for a motor prepared competition!
