Banner
Ideal to refurbish your original air box.
The best solution is to prepare his mécaboite sometimes to prepare its original air box. Indeed, it will be much quieter than a horn and takes less water, dust and other foreign bodies .... And above all you will have a large reserve of air. With this foam you can catch more air so more performance. This foam mounts in the original air box motorcycle Derbi Super Motard, Senda, Cross, Enduro, X-trem, X-race, DRD ... and other gear.
Remember to review your carburetor settings after installation of this type of filter. To prepare an air box, the most appropriate solution is to install a racing foam, and reopen the air inlet (generally recommend an entry 5X10CM instead of 3 small original holes you can add a grid with 4 screws to prevent anything from falling in the box).
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 115050A
K & N green horn type air filter, angled at 45 ° but adjustable at half the elbow! A very good filter that breathes well.
Reference: 04 9424.K0
MALOSSI E5 air filter with black cover. Available for PHVA, PHBN, PHBL, MIKUNI, PHVB, PHF, PHBH ...
Reference: 203.0048
A filter available in 3 diameters and 2 lengths for maximum application, it reflects the quality of its design and design!
Reference: 0413434
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 203.0166
A filter with a large reserve of air, special large PWK carburetor, PHBH, PHBL, POLINI CP with tulip ... and other models. Ideal for a motor prepared competition!
Reference: 480883
A good quality filter with colors to choose to customize your engine without taking up space.
Reference: 203.0116
A 90 ° angled filter, high quality horn with a nice anodized blue color and several fixing sizes to choose from.
Reference: 203.0110
A high quality filter, cone with a nice anodized blue color and several sizes of attachment to choose from.
Reference: 460457
A premium foam for better air supply to the engine. Ideal to prepare its original air box.
Reference: 203.1502
Ideal to fit your air filter Ø79mm on your carburetor PWK 24 to 30mm.
Reference: 473482
A quality air filter for improved filtration.
Reference: 203.0062
Ideal for positioning your filter at 30 °, a high-end filter for optimal protection of your engine against external impurities.
Reference: 115121
Air filter nice design black and blue color without cover, for a nice design with good performance on your 2 wheels.
Reference: 928.465.004
Ideal for modifying, increasing or reducing your air intake on the POLINI large volume gearbox!
Reference: 1413963
A foam that can adapt to all air boxes with optimal air filtering.
Ideal to refurbish your original air box.
