Reference: 203.0145
POLINI competition air filter foam double layer 41X29,7cm (to cut, A3)
POLINI air filter foam to cut, size 41X29,7cm / thickness 19mm uncompressed.
Banner
Here the air filter, angled 30 ° cone at Polini type K & N universal, high quality makes it clean and proper breathing engine thanks to its gate and foam high level of filtration. Engraved mark on the outside of the cone, it will give you a beautiful aesthetic racing! It comes in two sizes (see below). It comes with the connecting sleeve and clamp.
Always think has to use the correct oil on your filters to optimize protection and filtration.
This cone angle 30 ° POLINI is available in 2 carburetor mounting diameters:
-Ø35mm For PHVA / PHBN / PHBG / PHBD.
-Ø38mm For PHBL.
You will find here oils and cleaners air filter cone.
Remember to select the desired mounting diameter before adding to cart.
Reference: 203.0145
POLINI air filter foam to cut, size 41X29,7cm / thickness 19mm uncompressed.
Reference: 0413537
MALOSSI E17 air filter which allows the engine to breathe as much as possible while providing filtration worthy of the name.
Reference: 10323_00
A tulip which increases the venturi effect and therefore the efficiency of your engine.
Reference: 114225
A foam board 330 X 330mm, ideal for cutting, as you like the shape of your original air filter. Made in Italy!
Reference: 1213257B
MALOSSI rubber tulip to improve the venturi effect.
Reference: S410000200010
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 460013
Air filter with a unique look, small size.
Reference: 485252
A 200 X 300mm foam board, ideal for cutting, as you wish, the shape of your original air filter.
Reference: 343.0035
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Reference: 04 2418.50
MALOSSI E5 air filter with black cover. Available for PHVA, PHBN, PHBL, MIKUNI, PHVB, PHF, PHBH ...
Reference: 203.0064
A very high-end filter that will allow you maximum performance of your engine without worrying about impurities.
Reference: 1381
TUN 'R air filter for carburettor, ideal for offering more performance to your engine equipped with a 15 or 16mm SHA!
Reference: 328087
Small discreet filter of good quality with several colors available to best adapt it to your machine.
Reference: 2640081
A very well designed filter with multiple size choices to best suit your carburetor.
Reference: 04 3072
Here is a small filter that allows you to have a lot of area while taking up little space.
Reference: 203.0090
A competition air filter outlet bent at 30 °, high-end model with several sizes of fixing choices.