
Reference: KOY6022.R0
Wheel Bearing SKF60 / 22 2RS Ø22 X 44 X 12mm
Wheel bearing of very good quality, ideal when your wheel forces or vibrates too much!
Banner
Kit reinforced complete chain FRANCE EQUIPMENT of size origin thus no 520, crown of 40 with 54 teeth, pinion of 12, 13, or 14 teeth with the choices. Ideal to start fresh on your bike cross enduro HONDA CRF 250 from 2004 to 2009.
- Reinforced 520HG: With a RK 520 reinforced chain .
-Ultra reinforced RK520XW Moto cross: With a chain RK520MXZ ULTRA
Reinforced XW-ring, so with seal that maintain lubrication! The best of the best in quality!
The pinion and the crown are cut in the best materials in France for a quality and an optimal lifetime! You should know that the original HONDA CRF 250.R motorcycles are equipped with a low range chain kit (identical to the first price here), and a final transmission in 13x51 teeth! You'll choose a bigger gear or a smaller crown for more top speed, and a smaller gear for more acceleration!
Attention, a longer chain kit is more difficult to tier, so plan at least one exhaust line and a sports air filter to pull a tooth or two more pinion. A tooth with a pinion is about equivalent to 5 teeth at the crown!
Mounts on HONDA 250 CRF R from 2004 to 2009
Reference: KOY6022.R0
Wheel bearing of very good quality, ideal when your wheel forces or vibrates too much!
Reference: SKF6304.R3
Very good quality wheel bearing, ideal when your wheel forces or vibrates too much!
Reference: 94107.462
High-end French-made chain kit with O'RING chain on O-rings.
Reference: 154335
A 165mm small diameter foam with a stopwatch and built-in clock!
Reference: 493810
A battery with maintenance, good service life and easy to install! Delivered with acid Dimensions: L135 X W60 X H135mm.
Reference: 17612
Universal homologated rear light.
Reference: 174.0029
Front and rear brake pads at low price for maxi-scooter, scooter, motorcycle, 125cc and mécaboite.
Reference: 118125.146 / 47 /...
ULTRA REINFORCED steel chain kit of very high quality for your AJP PR3 Enduro from 2003 to 2018, crown and gables with number of teeth choices, cut in the best steels and made in France!
Reference: 10005.E1248.12
Pinion of very high quality, available from 12 to 16 teeth to adjust on acceleration or top speed! For motorcycle 125cc.
Reference: 4915.1068.38
Crown of very high quality French, made of the best materials, for KTM motorcycles!
Reference: 515961
Replacement handlebar cover for your PW50.
Reference: 148513
Models with open or closed sides, color of your choice. Ø22/25mm.
Reference: 176.0154
High quality jaws and all at a low price.
Reference: 623
Universal homologated bar rear light.
Reference: 273110.556 / 558 / 562...
Kit chain high-end French manufacture with several toothings and 4 qualities to choose from!
Reference: HF136
High quality oil filter for optimal filtration!