Reference: 02 6639B

Flexible MALOSSI pipe Ø28 by 46mm for MALOSSI MG, Minarelli am6 and DERBI euro1,2 & 3

An intake pipe designed for large carburetion This pipe is short for faster recovery.

Reference: 18 6540

housing support plate MALOSSI PEUGEOT 103 SPX / RCX / CLIP

Ideal to restore its original drive with its cover casings MALOSSI on 103!

Reference: 685

housings seal motor origin or original type TEKNIX Peugeot 103

A seal of high quality at low cost for safe motor and leakage!

Reference: 215.0330

Inlet pipe for POLINI casings without support incorporated on Peugeot 103 (Ø 15 or 19mm with the choices)

Reference: pipe_15mm_carenzi

Intake pipe for MALOSSI , CARENZI Ø15 (SHA) casings for all 103

A pipe specially designed for MALOSSI / CARENZI casings

Reference: 02 6238B

Intake pipe for MALOSSI Ø20.8 by 24mm housings (PHBG) for all 103

A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.

Reference: 215.0370

Intake pipe for POLINI housings incorporated support on Peugeot 103 (Ø 15 or 19mm with the choices)

Intake pipe for POLINI support housings incorporated on PEUGEOT 103.

Reference: 3938

Joint spy (spi) crankshaft CGN side dimmer for Peugeot 103

Good quality left-hand seal sold retail!

Reference: 3960

Joint spy (spi) of crankshaft CGN ignition side for Peugeot 103

Good quality straight spy joint sold at retail!

Reference: 290.0120

kit of 4 screws and washers machined for POLINI casings without support Peugeot 103

Reference: 27 4235.K0

MALOSSI VL6 carbon or karbonit valves of your choice for minarelli am6 / DERBI / peugeot 103 malossi...

Valves that are suitable for both small and large configurations.

Reference: 8933

Nut ALGI white galvanized steel sizes and Ø with the choices for engine, chassis, ...

Good quality nuts with several sizes available to adapt to the best.

Reference: mousse_polini

Original size POLINI crankshaft oil seal foam/felt for Peugeot 103

Crankcase foam

Reference: 540969

P2R crankcase oil seal support flange PEUGEOT 103

Oil seal fixing support plate or flange (spinnaker) on PEUGEOT 103 engine crankcases.

Reference: 508610

P2R VITON crankshaft oil seal (spi) on the variator side for Peugeot 103

Excellent quality left spi seal sold at retail!

Reference: 508609

P2R VITON crankshaft spy seal (spinnaker) ignition side for Peugeot 103

Excellent quality right spy seal sold at retail!

Reference: 209.0300

Pack seal for crankcase POLINI without support incorporated on Peugeot 103

Reference: 209.0374

Pack seal for POLINI crankcases with built-in support on Peugeot 103

Seal set for POLINI housings with incorporated support on 103.

Reference: 11 6523

Pack seal with foam for MALOSSI engine casings on Peugeot 103 and MG engine

Ideal for reassembly without leakage.

Reference: 144.270.001

POLINI flexible pipe 21mm for POLINI PANTERA, MINICROSS, XP5, XP3, XP1, X5, X3, X1 ... 103, 51

Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!

Reference: 213.0013

RACING valves for POLINI MBK 51 / PEUGEOT 103 casings Built-in support

RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...